Keyword: Acid-resistance tests
British Standards Institute, BSI



Go to All Keywords 		BSI Standards
picture picture picture picture picture picture
BS 1006:1990
Methods of test for colour fastness of textiles and leather
0 580 18910 4
Summary: General principles. Definition of the grey scales for change in colour and for staining. Methods for determining colour fastness to approximately 70 different agents.
Keywords: Textile testing, Textiles, Textile products, Colour-fastness tests, Comparative tests, Specimen preparation, Testing conditions, Stain tests, Environmental testing, Artificial lighting, Mercury-vapour lamps, Test specimens, Test equipment, Washing tests, Visual inspection (testing), Water-resistance tests, Seawater, Sweat, Chemical-resistance tests, Acid-resistance tests, Alkali-resistance tests, Nitrogen oxides, Damp-heat tests, Leather, Colour tests, Boiling tests, Friction tests, Chemical tests (textiles)
BS 318:1988
Specification for chrome oxide green pigments for paints
0 580 16366 0
Summary: Requirements and methods of test.
Keywords: Pigments, Chromium inorganic compounds, Oxides, Paints, Green, Grades (quality), Colorimetry, Spectrophotometry, Spectrochemical analysis, Determination of content, Chemical analysis and testing, Ignition-loss tests, Volatile matter determination, Screening (sizing), Alkali-resistance tests, Acid-resistance tests, Volumetric analysis, Particulate materials, Equations
BS 3473-5:1987
Chemical resistance of glass used in the production of laboratory glassware. Method for determination of resistance of glass to attack by 6 mol/L hydrochloric acid at 100$0DC
0 580 15331 2
Summary: Methods for determining and classifying the amount of alkali metal oxides released from the surface of glassware when subject to attack at 100 $0P 1$0DC for 3 h.
Keywords: Laboratory glassware, Laboratory ware, Glassware, Glass, Acid-resistance tests, Hydrochloric acid, Chemical-resistance tests, Testing conditions, Temperature, Test equipment, Specimen preparation, Flame photometry, Emission spectrophotometry, Boiling, Atomic absorption spectrophotometry, Chemical analysis and testing
BS 3996:1978
Specification for colour coding for one-mark and graduated pipettes (including requirements for the service performance of the colour coding enamels)
0 580 09929 6
Keywords: Pipettes, Laboratory glassware, Laboratory equipment, Colour codes, Marking, Vitreous enamel, Performance testing, Durability, Colour-fastness tests, Chemical-resistance tests, Detergents, Acid-resistance tests
BS 4789:1972
Specification for ceramic components for use in envelopes for electronic tubes
0 580 06699 1
Summary: Lists the definitions, properties and test methods and gives the test schedules for type, batch and component testing of three categories of ceramic material suitable for use in electronic tube envelopes.
Keywords: Electron tubes, Electron tube structure, Electron tube components, Ceramics, Electronic equipment and components, Solid electrical insulating materials, Electrical insulating materials, Testing conditions, Permittivity, Dissipation factor, Electrical resistivity, Strength of materials, Thermal conductivity, Type testing, Specimen preparation, Mechanical testing, Breaking load, Test specimens, Dimensions, Deformation, Thermal testing, Visual inspection (testing), Acid-resistance tests, Pressure testing, Test equipment, Vacuum tubes, Microwave tubes
BS 4T 100:1997
Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock
0 580 26471 8
Keywords: Seamless pipes, Pipes, Steels, Corrosion-resistant steels, Austenitic steels, Heat-treatable steels, Aircraft components, Air transport engineering, Billets, Cold-working, Dimensions, Thickness, Diameter, Defects, Dimensional tolerances, Approval testing, Acceptance (approval), Inspection, Sampling methods, Marking, Heat treatment, Mechanical testing, Tensile testing, Flattening tests, Hardness testing, Drift expanding tests, Hydraulic tests, Pressure testing, Non-destructive testing, Ultrasonic testing, Decarburization tests, Intergranular corrosion, Corrosion tests, Acid-resistance tests, Surface defects, Test specimens, Testing conditions, Formulae (mathematics)
BS 5292:1980
Specification for jointing materials and compounds for installations using water, low-pressure steam or 1st, 2nd and 3rd family gases
0 580 11400 7
Summary: Properties and testing requirements of screwed, flange and flat seated joints. Includes anaerobic jointing compounds for use with gas applications.
Keywords: Sealing materials, Joints, Pipe fittings, Pipe couplings, Screwed fittings, Flanged fittings, Water supply (buildings), Hot-water supply systems, Cold-water supply systems, 1st family gases, 2nd family gases, 3rd family gases, Gas pipes, Pressure pipes, Water, Pipes, Steam, Vulcanized fibre, Thickness, Dimensional changes, Shrinkage, Density measurement, Tensile strength, Tensile testing, Proof loading, Bend testing, Natural rubber, Sealing rings, Seals, Reinforced materials, Cloth, Leak tests, Acid-resistance tests, Desorption, Absorption, Dimensions, Water content determination, Performance testing, Corrosion tests, Vibration, Strength of materials, Test equipment, Anaerobic adhesives
BS 5642-1:1978
Sills and copings. Specification for window sills of precast concrete, cast stone, clayware, slate and natural stone
0 580 10439 7
Summary: Coordinating sizes, performance requirements, materials and workmanship. Guidance on jointing and waterproofing.
Keywords: Cills, Precast concrete, Concretes, Cast stone, Stone, Slate, Clay, Construction materials, Windows, Frames for openings, Dimensional coordination, Size, Marking, Reinforced concrete, Terracotta, Quality control, Construction operations, Acid-resistance tests, Immersion tests (corrosion), Water-resistance tests, Reinforcement
BS 5642-2:1983
Sills and copings. Specification for copings of precast concrete, cast stone, clayware, slate and natural stone
0 580 13522 5
Summary: Requirements for materials, mass, cross section dimensions and tolerances. The appendix gives recommendations for design and installation of coping systems.
Keywords: Coping units, Walls, Precast concrete, Concretes, Cast stone, Stone, Slate, Clay, Terracotta, Construction materials, Marking, Dimensions, Quality control, Design, Reinforcement, Acid-resistance tests, Immersion tests (corrosion), Water-resistance tests
BS 6088:1981
Specification for solid glass beads for use with road marking compounds and for other industrial uses
0 580 12171 2
Summary: Requirements and test methods for composition, dimensions and optical properties of the beads and to establish effectiveness of coatings for flotation and moisture proofing. Provides a dispute procedure for subjective tests.
Keywords: Glass, Waterproof materials, Particle size distribution, Defect counting, Marking, Sampling methods, Refractive index, Optical measurement, Magnetic materials, Corrosion tests, Water-resistance tests, Coatings, Reinforced materials, Plastics, Road marking, Quality assurance, Particle size measurement, Spherical shape, Weight measurement, Flotation agents, Acid-resistance tests
BS 65:1991
Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings
0 580 20268 2
Summary: Specifies certain dimensions, physical and performance characteristics for vitrified clay pipes and fittings. For use in the construction of drainage and sewerage systems, operated as gravity pipelines, or as ducts. Requirements for sampling and marking are also given.
Keywords: Ceramics, Pipes, Pipe fittings, Pipe couplings, Pipe junctions, Bend couplings, Fluid equipment, Ducting, Sealing rings, Drainpipes, Sewers, Drainage, Surface-water drainage, Glazed ceramic ware, Dimensions, Dimensional tolerances, Diameter, Preferred sizes, Perforations, Straightness measurement, Performance, Compressive strength, Crushing tests, Bend testing, Leak tests, Chemical-resistance tests, Water absorption, Acid-resistance tests, Deflection tests, Shear testing, Statistical quality control, Sampling methods, Testing conditions, Marking, Pressure testing, Mechanical testing, Acceptance inspection, Test equipment, Strength of materials, Spigot-and-socket joints
BS EN 12373-4:1999
Aluminium and aluminium alloys. Anodizing. Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
0 580 32030 8
Summary: Comparison with chart of coloured spots of two dyes.
Keywords: Aluminium, Aluminium alloys, Anodizing, Oxidation methods, Coatings, Anodic coating, Electrodeposition, Absorption, Dyes, Stain tests, Acids, Acid-resistance tests, Surface treatment, Chemical analysis and testing, Visual inspection (testing), Protective coatings, Sealing (anodized coatings)
BS EN 12373-6:1999
Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment
0 580 32028 6
Summary: Applicable to anodic oxide coatings intended for decorative or protective purposes or where resistance to staining is important.
Keywords: Aluminium, Aluminium alloys, Anodizing, Anodic coating, Coatings, Sealing (anodized coatings), Electrodeposition, Protective coatings, Surface treatment, Weight measurement, Immersion tests (corrosion), Acid-resistance tests, Test specimens, Specimen preparation
BS EN 12373-7:1999
Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment
0 580 32027 8
Summary: Particularly applicable to anodic oxide coatings intended for architectural purposes. For less severe applications, the method described in BS EN 12373-6 might be more suitable.
Keywords: Aluminium, Aluminium alloys, Anodizing, Anodic coating, Sealing (anodized coatings), Assessed quality, Protective coatings, Construction systems parts, Acid-resistance tests, Immersion tests (corrosion), Chemical-resistance tests, Weight measurement, Specimen preparation, Testing conditions
BS EN 14030:2001
Geotextiles and geotextile-related products. Screening test method for determining the resistance to acid and alkaline liquids
0 580 40077 8
Keywords: Geotextiles, Textile products, Textile testing, Acid-resistance tests, Alkalinity, Liquids, Alkalis, Polyamides, Polyesters
BS EN 14431:2004
Vitreous and porcelain enamels. Characteristics of the enamel coatings applied to steel panels intended for architecture
0 580 45467 3
Keywords: Vitreous enamel, Ceramic coatings, Structural steels, Steels, Construction materials, Cold rolling, Adhesion tests, Porosity testing, Abrasion testing, Impact testing, Scratch tests, Hardness testing, Flatness (surface), Acid-resistance tests, Gloss (of surface), Colour
BS EN 14483-1:2004
Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by acids at room temperature
0 580 44977 7
Keywords: Vitreous enamel, Ceramic coatings, Non-metallic coatings, Coatings, Chemical-resistance tests, Corrosion tests, Acid-resistance tests, Visual inspection (testing), Grades (quality)
BS EN 14483-2:2004
Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours
0 580 44978 5
Keywords: Vitreous enamel, Ceramic coatings, Non-metallic coatings, Coatings, Chemical-resistance tests, Corrosion tests, Acid-resistance tests, High-temperature testing, Boiling tests, Liquids, Water-resistance tests, Water-vapour tests
BS EN 14483-5:2004
Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion in closed systems
0 580 44981 5
Keywords: Vitreous enamel, Ceramic coatings, Non-metallic coatings, Coatings, Chemical-resistance tests, Corrosion tests, Acid-resistance tests, Alkali-resistance tests, Liquids, Test equipment, Chemical technology equipment
BS EN 1457:1999
Chimneys. Clay/ceramic flue liners. Requirements and test methods
978 0 580 59188 4
Keywords: Flue linings, Flues, Chimneys, Ceramics, Clay, Marking, Performance testing, Curvature, Angles (geometry), Temperature, Pressure, Fire resistance, Air permeability, Dimensional tolerances, Diameter, Height, Width, Loading, Leak tests, Acid-resistance tests, Water-absorption tests, Bulk density, Vapours, Water, Thermal testing, Quality control, Sampling methods, Straightness measurement, Thermal-shock tests, Classification systems
BS EN 1806:2006
Chimneys Clay/ceramic flue blocks for single wall chimneys Requirements and test methods
0 580 48889 6
Keywords: Chimneys, Flue blocks, Clay, Ceramics, Loading, Thermal resistance, Fire resistance, Performance testing, Thermal testing, Gas-resistance tests, Acid-resistance tests, Water-absorption tests, Marking, Conformity, Inspection, Quality assurance
BS EN 60903:2003
Live working. Gloves of insulating material
0 580 43451 6
Keywords: Insulating gloves, Protective gloves, Gloves, Protective clothing, Electrical safety, Occupational safety, Electrical insulating materials, Grades (quality), Elastomers, Dimensions, Defects, Inspection, Dimensional measurement, Mechanical testing, Electrical testing, Heat ageing tests, Fire tests, Low-temperature testing, Acid-resistance tests, Ozone, Chemical-resistance tests, Oil-resistance tests, Approval testing, Quality assurance
BS EN 60984:1993
Specification for sleeves of insulating material for live working
0 580 22035 4
Summary: Refers to 5 categories of insulating material for resistance to acid, oil, ozone and combined resistance at low temperatures.
Keywords: Sleeves (clothing), Clothing, Protective clothing, Solid electrical insulating materials, Elastomers, Electrical insulating materials, Electrical safety, Occupational safety, Electric contact protection, Grades (quality), Shape, Dimensions, Marking, Colour codes, Packaging, Dimensional measurement, Inspection, Testing conditions, Test specimens, Tensile testing, Penetration tests, Mechanical testing, Tension set, Dielectric-strength tests, Electrical testing, Heat ageing tests, Fire tests, Low-temperature testing, Acid-resistance tests, Oil-resistance tests, Ozone, Chemical-resistance tests, Test equipment, Selection, Sampling methods
BS EN 993-16:1995
Methods of test for dense shaped refractory products. Determination of resistance to sulfuric acid
0 580 24791 0
Summary: Specifies a method for the determination of the resistance of dense shaped refractory products to attack by sulphuric acid.
Keywords: Refractories, Shaped refractories, Refractory materials, Ceramics, Chemical analysis and testing, Acid-resistance tests, Chemical-resistance tests
BS EN ISO 10545-13:1997
Ceramic tiles. Determination of chemical resistance
0 580 28661 4
Keywords: Tiles, Ceramics, Ceramic and glass technology, Construction materials, Chemical-resistance tests, Acid-resistance tests, Alkali-resistance tests, Grades (quality), Classification systems, Test equipment, Test specimens, Specimen preparation
BS EN ISO 105-E05:2006
Textiles. Tests for colour fastness. Colour fastness to spotting. Acid
0 580 48662 1
Keywords: Textiles, Colour-fastness tests, Textile testing, Fabric testing, Cloth, Dyeing, Comparative tests, Textile products, Acid-resistance tests, Test specimens, Dimensions
BS EN ISO 105-E13:1997
Textiles. Tests for colour fastness. Colour fastness to acid-felting. Severe
0 580 27308 3
Keywords: Textiles, Colour-fastness tests, Textile testing, Fabric testing, Cloth, Dyeing, Comparative tests, Colour fastness, Acid-resistance tests, Textile products, Test specimens, Specimen preparation
BS EN ISO 105-E14:1997
Textiles. Tests for colour fastness. Colour fastness to acid-felting. Mild
0 580 27304 0
Keywords: Textiles, Colour-fastness tests, Textile testing, Fabric testing, Cloth, Dyeing, Comparative tests, Colour fastness, Acid-resistance tests, Textile products, Test specimens, Specimen preparation
BS EN ISO 3651-1:1998
Determination of resistance to intergranular corrosion of stainless steels. Austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
0 580 30041 2
Keywords: Stainless steels, Corrosion tests, Intergranular corrosion, Corrosion resistance, Steels, Austenitic steels, Ferritic steels, Acid-resistance tests, Nitric acid, Gravimetric analysis, Test specimens, Specimen preparation, Test equipment, Solution heat treatment, Inspection
BS EN ISO 3651-2:1998
Determination of resistance to intergranular corrosion of stainless steels. Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in media containing sulfuric acid
0 580 30040 4
Keywords: Stainless steels, Corrosion tests, Intergranular corrosion, Corrosion resistance, Steels, Austenitic steels, Ferritic steels, Acid-resistance tests, Sulfuric acid, Immersion tests (corrosion), Cast steels, Rolling, Forgings, Pipes, Test specimens, Specimen preparation, Heat treatment, Welded joints, Bend testing
BS EN ISO 9706:2000
Information and documentation. Paper for documents. Requirements for permanence
0 580 23239 5
Summary: Specifies requirements for paper intended for documents which require to maintain their integrity for a long period of time.
Keywords: Paper, Archive documents, Documents, Permanent, Durability, Tear tests, Strength of materials, Specimen preparation, Oxidation resistance, Kappa number, pH, Acid-resistance tests, Alkalis, Conformity, Graphic symbols, Symbols, Marking, Ageing tests
BS EN ISO 9917-1:2007
Dentistry. Water-based cements. Powder/liquid acid-base cements
978 0 580 59694 0
Keywords: Dental cements, Dental materials, Dentistry, Optical properties of materials, Classification systems, Compressive strength, Setting, Time, Arsenic, Lead, Acid-resistance tests, Films (states of matter), Thickness measurement, Compression testing, Optical measurement, Liquids, Particulate materials, Zinc inorganic compounds, Zinc organic compounds
BS ISO 10716:1994
Paper and board. Determination of alkali reserve
0 580 24231 5
Summary: For products that contain alkaline material added to improve the resistance to acid attack (degradation).
Keywords: Paper, Board (paper), Paper products, Determination of content, Alkalis, Alkalimetry, Volumetric analysis, Chemical analysis and testing, Specimen preparation, Testing conditions, Precision, Reproducibility, Degradation, Acid-resistance tests
BS ISO 11408:1999
Chemical conversion coatings. Black oxide coating on iron and steel. Specification and test methods
0 580 32995 X
Summary: Does not specify requirements for the substrate prior to black oxidizing.
Keywords: Coatings, Conversion coating, Oxides, Black, Iron, Wrought iron, Steels, Unalloyed steels, Low-alloy steels, Stainless steels, Heat treatment, Appearance, Acid-resistance tests, Oxalic acid, Corrosion resistance, Chemical-resistance tests, Coating processes, Temperature, Grades (quality), Hardenability, Porosity testing
BS ISO 12775:1997
Guidelines on types of glass of normal bulk-production composition and their test methods
0 580 29409 9
Keywords: Glass, Silica glass, Borosilicate glass, Bulk materials, Chemical composition, Glassware, Chemical properties, Physical properties of materials, Chemical analysis and testing, Determination of content, Physical property measurement, Classification systems, Thermal expansion, Durability, Hydrolytic resistance, Acid-resistance tests, Alkali-resistance tests, Test specimens, Thermal properties of materials
BS ISO 2836:2004
Graphic technology. Prints and printing inks. Assessment of resistance to various agents
978 0 580 63916 6
Keywords: Prints, Printing inks, Printing materials, Printing, Water-resistance tests, Colour-fastness tests, Chemical-resistance tests, Acid-resistance tests, Solvent-resistance tests, Varnishes, Alkali-resistance tests, Oil-resistance tests, Fats, Cheese, Detergents, Soaps, Waxes, Spices, Specimen preparation
BS ISO 3585:1998
Borosilicate glass 3.3. Properties
0 580 30552 X
Keywords: Borosilicate glass, Glass, Laboratory glassware, Hydrolytic resistance, Chemical-resistance tests, Acid-resistance tests, Alkali-resistance tests, Heat-resistant materials, Thermal expansion, Density, Thermal conductivity, Specific heat, Viscosity, Softening point, Modulus of elasticity, Poisson ratio, Tensile strength
BS ISO 9286:1997
Abrasive grains and crude. Chemical analysis of silicon carbide
0 580 27568 X
Keywords: Abrasives, Silicon inorganic compounds, Carbides, Chemical analysis and testing, Determination of content, Impurities, Defects, Surface defects, Surface properties, Silicon, Carbon, Silicon dioxide, Iron, Aluminium oxide, Calcium oxide, Magnesium inorganic compounds, Monoxides, Volumetric analysis, Coulometric methods, Gravimetric analysis, Spectrochemical analysis, Spectrophotometry, Acid-resistance tests, Test equipment, Specimen preparation
BS 1181:1971
Specification for clay flue linings and flue terminals
Not Current
0 580 06532 4
Summary: Materials, workmanship, design, construction, dimensions, tests for clay flue linings, bends, flue terminals for heating appliances and incinerators and for ventilation.
Keywords: Flue linings, Crushing tests, Dimensions, Thermal resistance, Chimneys, Chimney terminals, Thermal testing, Clay, Acid-resistance tests, Ceramic glazes, Chimney-pots, Dimensions, Incinerators, Straightness measurement, Ventilation equipment, Curved, Heating equipment, Permeability measurement, Leak tests
BS 1181:1989
Specification for clay flue linings and flue terminals
Not Current
0 580 17534 0
Summary: For use with certain domestic appliances, including gas burning installations, and for ventilation. Dimensions, performance characteristics, sampling, testing, inspection and marking.
Keywords: Flue linings, Chimney terminals, Flues, Chimneys, Ceramics, Dimensions, Radius, Curvature, Form tolerances, Performance, Straightness measurement, Statistical quality control, Quality control, Marking, Dimensional measurement, Crushing tests, Testing conditions, Test equipment, Pressure testing, Loading, Thermal resistance, Thermal testing, Acid-resistance tests, Artificial weathering tests, Sampling methods, Acceptance inspection, Leak tests
BS 1181:1999
Specification for clay flue terminals
Not Current
0 580 33032 X
Keywords: Flues, Chimney terminals, Chimneys, Ceramics, Clay, Dimensions, Dimensional tolerances, Width, Diameter, Size, Performance, Heat-resistant materials, Thermal testing, Acid-resistant materials, Acid-resistance tests, Chemical-resistant materials, Weather resistance, Environmental testing, Accelerated testing, Test specimens, Testing conditions, Marking
BS 1195:Part 1:1973
Specification for kitchen fitments and equipment. Imperial units with metric equivalents
Not Current
0 580 07183 9
Summary: Dimensional equivalents of kitchen fitments for domestic kitchens. Performance, protection, storage, installation.
Keywords: Catering equipment, Storage furniture, Domestic, Kitchen furniture, Plinths, Work benches, Doors, Drawers, Fixing, Visual inspection (testing), Performance testing, Built-in furniture, Wood, Dimensions, Woodbased sheet materials, Shelving, Glass, Ironmongery (buildings), Fasteners, Finishes, Loading, Specimen preparation, Hardness testing, Chemical-resistance tests, Acid-resistance tests, Oil-resistance tests, Food products, Beverages, Soaps, Humidity, Water-resistance tests, Bleaches, Detergents, Imperial system, Storage, Installation
BS 1195:Part 2:1972
Specification for kitchen fitments and equipment. Metric units
Not Current
0 580 07052 2
Summary: Base units, sink units, wall units, tall units for domestic kitchens. Performance tests, protection, storage, installation. Dimensionally co-ordinated sizes.
Keywords: Catering equipment, Storage furniture, Domestic, Kitchen furniture, Shelving, Drawers, Work benches, Doors, Fixing, Visual inspection (testing), Performance testing, Built-in furniture, Wood, Woodbased sheet materials, Fasteners, Glass, Ironmongery (buildings), Finishes, Chemical-resistance tests, Loading, Specimen preparation, Hardness testing, Acid-resistance tests, Beverages, Food products, Soaps, Humidity, Water-resistance tests, Oil-resistance tests, Bleaches, Storage, Installation, SI system (metric), Dimensions, Flexibility
BS 1344:Part 3:1967
Methods of testing vitreous enamel finishes. Resistance to products of combustion containing sulphur compounds
Not Current
0 580 01911 X
Summary: Includes method for classifying the results.
Keywords: Vitreous enamel, Ceramic coatings, Non-metallic coatings, Coatings, Finishes, Acid-resistance tests, Sulfuric acid, Chemical-resistance tests, Combustion products, Sulfur inorganic compounds, Testing conditions, Visual inspection (testing), Grading (quality)
BS 1344:Part 3:1988
Methods of testing vitreous enamel finishes. Determination of resistance to sulphuric acid at room temperature
Not Current
0 580 16397 0
Summary: Includes a method for classifying results.
Keywords: Vitreous enamel, Ceramic coatings, Non-metallic coatings, Coatings, Specimen preparation, Finishes, Acid-resistance tests, Testing conditions, Sulfuric acid, Chemical-resistance tests, Reflection, Visual inspection (testing), Surface defects, Grades (quality), Grading (quality)
BS 1344-10:1987
Methods of testing vitreous enamel finishes. Determination of resistance to condensing hydrochloric acid vapour
Not Current
0 580 16218 4
Keywords: Vitreous enamel, Ceramic coatings, Coatings, Finishes, Non-metallic coatings, Testing conditions, Test duration, Acid-resistance tests, Vapours, Chemical-resistance tests, Hydrochloric acid, Condensation
BS 1344-14:1984
Methods of testing vitreous enamel finishes. Apparatus for testing with acid and neutral liquids and their vapours
Not Current
0 580 14178 0
Keywords: Vitreous enamel, Ceramic coatings, Coatings, Non-metallic coatings, Finishes, Test equipment, Design, Dimensions, Acid-resistance tests, Chemical-resistance tests, Gas-resistance tests, Liquids, Vapours
BS 1344-2:1975
Methods of testing vitreous enamel finishes. Resistance to citric acid at room temperature
Not Current
0 580 08946 0
Summary: Also gives method for classifying results.
Keywords: Vitreous enamel, Ceramic coatings, Non-metallic coatings, Coatings, Finishes, Acid-resistance tests, Citric acid, Chemical-resistance tests, Testing conditions, Temperature, Visual inspection (testing), Grading (quality)
BS 1344-8:1984
Methods of testing vitreous enamel finishes. Determination of resistance to boiling citric acid
Not Current
0 580 14177 2
Keywords: Vitreous enamel, Ceramic coatings, Non-metallic coatings, Coatings, Finishes, Acid-resistance tests, Chemical-resistance tests, Citric acid, Boiling, Testing conditions, Boiling (cooking)
BS 1902:Part 3:Section 3.12:1989
Methods of testing refractory materials. General and textural properties. Determination of resistance to sulphuric acid (powders) (method 1902-312)
Not Current
0 580 17410 7
Summary: Method for determining loss of mass on exposure of powder of specified particle size to boiling sulphuric acid for six hours.
Keywords: Refractory materials, Shaped refractories, Refractories, Acid-resistance tests, Sulfuric acid, Testing conditions, Specimen preparation, Chemical analysis and testing
BS 2598:Part 1:1980
Glass plant, pipeline and fittings. Specification for properties of borosilicate glass 3.3
Not Current
0 580 11183 0
Summary: Specifies characteristics of a type of glass designated 'borosilicate glass 3.3' used for constructing glass plant and pipeline.
Keywords: Glass, Borosilicate glass, Density, Chemical-resistant materials, Acid-resistant materials, Viscosity, Tensile strength, Alkali-resistance tests, Modulus of elasticity, Acid-resistance tests, Pipelines, Industrial pipework systems, Chemical-resistance tests, Pipe fittings, Thermal properties of materials
BS 3424:1973
Methods of test for coated fabrics
Not Current
0 580 07844 2
Summary: Describes methods dealing with a wide range of coated fabrics characteristics. An appendix gives methods of test designed specifically for the use of government departments.
Keywords: Coated fabrics, Cloth, Textile products, Textile technology, Textile testing, Fabric testing, Friction tests, Artificial ageing tests, Polyvinyl chloride, Nitrocelluloses, Fire tests, Air permeability, Dimensional stability tests (textiles), Wicking-resistance tests, Stain tests, Tensile loading, Tension set, Thickness measurement, Wear resistance, Tensile testing, Water-resistance tests, Cleanliness tests (textiles), Acid-resistance tests, Alkali-resistance tests, Specular reflection, Gloss (of surface), Hydrogen peroxide, Chemical-resistance tests, Creasing tests, Infrared radiation, Reflectance factor, Bend testing
BS 4346-1:1969
Joints and fittings for use with unplasticized PVC pressure pipes. Injection moulded unplasticized PVC fittings for solvent welding for use with pressure pipes, including potable water supply
Not Current
0 580 00414 7
Summary: Material, dimensions, stress relief test, resistance to sulphuric acid, opacity, effect on water and hydraulic pressure tests. Methods of test in appendices together with a specification for solvent cements for use with injection moulded unplasticized PVC fittings for solvent welding.
Keywords: Pipe fittings, Pipe couplings, Pressure pipes, Pipes, Plastics, Polyvinyl chloride, Unplasticized polyvinyl chloride, Injection moulding, Bonding, Water, Deformation, Temperature, Dimensions, Opacity, Materials in contact with food, Type testing, Marking, Thermal testing, Acid-resistance tests, Chemical-resistance tests, Hydraulic tests, Sampling methods, Determination of content, Water testing, Solvent welding, Statistical quality control, Visual inspection (testing), Mechanical testing, Stress relieving
BS 4346-2:1970
Joints and fittings for use with unplasticized PVC pressure pipes. Mechanical joints and fittings, principally of unplasticized PVC
Not Current
0 580 06115 9
Summary: Material, dimensions, appearance, marking, sampling, tests for stress relief, resistance to sulphuric acid, opacity, effect on water, pressure effects.
Keywords: Pipe fittings, Pipe couplings, Pressure pipes, Pipes, Plastics, Polyvinyl chloride, Unplasticized polyvinyl chloride, Compression fittings, Water, Deformation, Temperature, Dimensions, Opacity, Type testing, Marking, Thermal testing, Acid-resistance tests, Chemical-resistance tests, Sampling methods, Determination of content, Pressure testing, Test equipment, Water testing, Hydraulic tests, Statistical quality control, Flattening tests, Mechanical testing, Stress relieving
BS 4576:Part 1:1970
Unplasticized polyvinyl chloride (PVC-U) rainwater goods and accessories. Half-round gutters and circular pipe
Not Current
0 580 05927 8
Summary: Material, colour, dimensions, physical requirements, notes on fixing.
Keywords: Unplasticized polyvinyl chloride, Polyvinyl chloride, Polymers, Plastics, Rainwater control systems, Eaves gutters, Gutters, Circular shape, Pipes, Semi-circular shape, Rainwater pipes, Drainpipes, Pipe fittings, Gutter fittings and accessories, Softening point, Colour, Diameter, Thickness, Area, Length, Dimensions, Marking, Tensile strength, Elongation at fracture, Design, Angles (geometry), Acid-resistance tests, Alkali-resistance tests, Test specimens, Thermal testing, Impact testing, Testing conditions, Deflection tests, Watertightness tests, Test equipment, Corrosion tests
BS 4660:1973
Specification for unplasticized PVC underground drain pipe and fittings
Not Current
0 580 07836 1
Summary: Nominal sizes of 110 mm and 160 mm. Materials, material colour, dimensions, marking, sampling and tests on pipe, fittings and assemblies. Notes for guidance on storage, handling and installation.
Keywords: Unplasticized polyvinyl chloride, Polyvinyl chloride, Polymers, Plastics, Drainpipes, Pipes, Pipe fittings, Drainage, Underground, Colour, Diameter, Thickness, Length, Dimensions, Sampling methods, Marking, Tensile strength, Elongation at fracture, Testing conditions, Design, Acid-resistance tests, Alkali-resistance tests, Test specimens, Thermal testing, Test equipment, Impact testing, Hydraulic tests, Pressure testing, Crushing tests, Mechanical testing, Deflection tests, Thermal-cycling tests, Stress relieving
BS 5328-1:1997
Concrete. Guide to specifying concrete
Not Current
0 580 26722 9
Summary: Choosing mixes and constituents to obtain concrete having the required performance in the fresh and hardened state.
Keywords: Concretes, Cement and concrete technology, Construction materials, Materials specification, Chemical composition, Composition, Designations, Grades (quality), Selection, Conformity, Aggregates, Cements, Chlorides, Environment (working), Durability, Compressive strength, Sampling methods, Workability, Acid-resistance tests, Sulfate-resisting cement
BS 5910:Part 1:1980
Methods of test for surface finishes for furniture. Assessment of surface resistance to cold liquids
Not Current
0 580 11235 7
Summary: Apparatus, preparation, test periods, procedures, assessment of results, test reports and suitable test liquids. Applicable to any finish, e.g. paint, varnish, laminates, paper, PVC foil.
Keywords: Furniture, Surface treatment, Finishes, Surface properties, Liquids, Physical testing, Water-resistance tests, Waterproofing materials, Chemical-resistance tests, Oil-resistance tests, Beverages, Inks, Test equipment, Acid-resistance tests, Visual inspection (testing), Solvent-resistance tests, Stain tests, Water stain tests
BS 6161:Part 3:1984
Methods of test for anodic oxidation coatings on aluminium and its alloys. Assessment of sealing quality by measurement of the loss of mass after immersion in phosphoric-chromic acid solution
Not Current
0 580 14041 5
Keywords: Coatings, Electrodeposition, Anodizing, Protective coatings, Aluminium, Aluminium alloys, Mass, Destructive testing, Immersion tests (corrosion), Acid-resistance tests, Phosphoric acid, Chromic acid
BS 6161-4:1981
Methods of test for anodic oxidation coatings on aluminium and its alloys. Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution
Not Current
0 580 12361 8
Summary: Enables assessment of sealing quality as applied to unsealed coatings serving as key to impregnating processes, hard anodic coatings in engineering, anodic coatings rendered hydrophobic and anodic coatings treated with dichromate only.
Keywords: Protective coatings, Coatings, Electrodeposition, Anodizing, Aluminium, Aluminium alloys, Mass, Destructive testing, Immersion tests (corrosion), Acid-resistance tests, Nitric acid, Acetic acid, Acetates, Sodium organic compounds, Sulfites, Sodium inorganic compounds, Sealing (anodized coatings)
BS 6431-18:1983
Ceramic floor and wall tiles. Method for determination of chemical resistance. Unglazed tiles
Not Current
0 580 13616 7
Summary: Defines a method of test for determining the chemical resistance of all unglazed ceramic tiles.
Keywords: Wall tiles, Flooring tiles, Tiles, Ceramics, Floor coverings, Wall coverings, Chemical-resistance tests, Acid-resistance tests, Alkali-resistance tests, Cleaning materials, Household cleaning materials
BS 6431-19:1984
Ceramic floor