Keyword: Accident prevention
British Standards Institute, BSI

Go to All Keywords

BSI Standards

BIP 2137:2007

BS OHSAS 18001 Laminated Pocketbook

978 0 580 50938 4

Keywords: Occupational safety, Health and safety requirements, Safety measures, Health and safety management, Environment (working), Environmental health, Management, Management operations, Planning, Policy formation, Risk assessment, Accident prevention, Performance, Quality auditing, Quality management, Personnel, Personnel management, Dangerous materials, Hazards, Technical documents, Training, Health and Safety

BS 18004:2008

Guide to achieving effective occupational health and safety performance

978 0 580 52910 8

Keywords: Occupational safety, Environment (working), Health and safety requirements, Health and safety management, Safety measures, Management, Management techniques, Planning, Performance, Accident prevention, Policy, Job specification, Personnel management, Conditions of employment, Technical documents, Group communication, Training, Risk assessment, Quality auditing, Conformity

BS 3598:1998

Fissile materials. Criticality safety in handling and processing. Recommendations

0 580 27931 6

Keywords: Nuclear safety, Criticality (nuclear reactions), Occupational safety, Safety measures, Nuclear fuels, Nuclear fuel processing, Materials handling, Quality assurance, Design, Maintenance, Nuclear fission, Industrial accidents, Accident prevention

BS 4086:1966

Recommendations for maximum surface temperatures of heated domestic equipment

0 580 35092 4

Summary: Technical considerations and recommended maximum temperatures for control components and working surfaces of any type of heated domestic equipment. See also PD 6504.

Keywords: Catering equipment, Heaters, Cooking vessels, Temperature, Domestic, Solid-fuelled devices, Surfaces, Surface properties, Metals, Vitreous enamel, Steels, Plastics, Natural rubber, Synthetic rubber, Household equipment, Domestic safety, Wood, Accident prevention

BS 5667-1:1979

Specification for continuous mechanical handling equipment - safety requirements. General

0 580 10497 4

Summary: Safety rules for construction, installation, utilization and maintenance. Gives precise directives necessary to comply with legal texts and requirements decreed by governing bodies in certain countries.

Keywords: Conveyors, Materials handling equipment, Materials handling, Safety measures, Occupational safety, Health and safety requirements, Accident prevention, Marking, Design, Installation, Maintenance, Legislation

BS 5667-10:1979

Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: vertical screw conveyors

0 580 10511 3

Keywords: Screw conveyors, Vertical, Conveyors, Elevators (conveyors), Materials handling equipment, Bulk materials, Materials handling, Safety measures, Occupational safety, Accident prevention, Design, Installation, Maintenance

BS 5667-11:1979

Specification for continuous mechanical handling equipment - safety requirements. Unit loads: fixed slat conveyors (metal or wood) with horizontal shafts

0 580 10512 1

Keywords: Slat conveyors, Fixed, Chain conveyors, Conveyors, Unit loads, Materials handling, Materials handling equipment, Shafts (rotating), Horizontal, Safety measures, Occupational safety, Accident prevention, Design, Installation, Maintenance, Machine guards, Safety devices

BS 5667-12:1979

Specification for continuous mechanical handling equipment - safety requirements. Unit loads: mobile slat conveyors (metal or wood) with horizontal shafts

0 580 10513 X

Keywords: Slat conveyors, Mobile, Chain conveyors, Conveyors, Unit loads, Materials handling, Materials handling equipment, Shafts (rotating), Horizontal, Safety measures, Occupational safety, Accident prevention, Design, Installation, Maintenance, Safety devices

BS 5667-13:1979

Specification for continuous mechanical handling equipment. - safety requirements. Unit loads: arm elevators and push bar conveyors

0 580 10516 4

Keywords: Elevators (conveyors), Chain conveyors, Conveyors, Push bar conveyors, Unit loads, Materials handling, Materials handling equipment, Safety measures, Occupational safety, Accident prevention, Design, Installation, Maintenance, Safety devices, Machine guards

BS 5667-14:1979

Specification for continuous mechanical handling equipment - safety requirements. Unit loads: live roller conveyors (with positive or friction drive)

0 580 10517 2

Keywords: Roller conveyors, Powered conveyors, Conveyors, Unit loads, Materials handling, Materials handling equipment, Safety measures, Occupational safety, Accident prevention, Design, Maintenance, Safety devices, Machine guards

BS 5667-15:1979

Specification for continuous mechanical handling equipment - safety requirements. Unit loads: crate-carrying chain conveyors having biplanar chains for flat-bottomed unit loads

0 580 10518 0

Keywords: Chain conveyors, Crates, Conveyors, Unit loads, Materials handling, Materials handling equipment, Safety measures, Occupational safety, Accident prevention, Design, Installation, Maintenance, Safety devices

BS 5667-16:1979

Specification for continuous mechanical handling equipment - safety requirements. Unit loads: slat band chain conveyors

0 580 10520 2

Keywords: Slat conveyors, Chain conveyors, Belt conveyors, Conveyors, Unit loads, Materials handling, Materials handling equipment, Safety measures, Occupational safety, Accident prevention, Design, Maintenance, Safety devices, Machine guards

BS 5667-17:1979

Specification for continuous mechanical handling equipment - safety requirements. Unit loads: continuous plate conveyors (horizontal)

0 580 10522 9

Keywords: Tray conveyors, Conveyors, Unit loads, Materials handling equipment, Horizontal, Materials handling, Safety measures, Occupational safety, Accident prevention, Design, Installation, Maintenance, Safety devices, Machine guards

BS 5667-18:1979

Specification for continuous mechanical handling equipment - safety requirements. Conveyors and elevators with chain-elements - examples for guarding of nip points

0 580 10527 X

Keywords: Chain conveyors, Elevators (conveyors), Conveyors, Materials handling equipment, Materials handling, Safety measures, Occupational safety, Accident prevention, Machine guards, Safety devices, Dimensions

BS 5667-19:1980

Specification for continuous mechanical handling equipment - safety requirements. Belt conveyors - examples for guarding of nip points

0 580 11324 8

Keywords: Belt conveyors, Conveyors, Materials handling, Materials handling equipment, Safety measures, Occupational safety, Accident prevention, Machine guards, Safety devices, Dimensions

BS 5667-2:1979

Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: pneumatic handling installations

0 580 10498 2

Keywords: Pneumatic conveyors, Pneumatically-operated devices, Conveyors, Materials handling equipment, Bulk materials, Materials handling, Safety measures, Occupational safety, Accident prevention, Design, Installation, Maintenance, Pneumatic equipment

BS 5667-3:1979

Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: storage equipment fed by a pneumatic handling system

0 580 10499 0

Keywords: Conveyors, Materials handling equipment, Bulk materials, Materials handling, Pneumatic conveyors, Hoppers, Bunkers, Bins, Silos, Containers, Bulk storage containers, Safety measures, Occupational safety, Accident prevention, Design, Installation, Maintenance, Materials handling components

BS 5667-4:1979

Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: mobile suction pipes suspended from derrick jibs used in pneumatic handling

0 580 10503 2

Keywords: Conveyors, Materials handling equipment, Bulk materials, Materials handling, Pneumatic conveyors, Suction hoses, Flexible pipes, Pipes, Mobile, Pneumatically-operated devices, Pneumatic equipment, Derricks, Safety measures, Occupational safety, Accident prevention, Design, Installation, Maintenance, Materials handling components

BS 5667-5:1979

Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: couplings and hose components used in pneumatic handling

0 580 10505 9

Keywords: Conveyors, Materials handling equipment, Bulk materials, Materials handling, Pneumatic conveyors, Pneumatic equipment, Hose connectors, Pipe couplings, Pipe fittings, Safety measures, Occupational safety, Accident prevention, Design, Installation, Maintenance, Materials handling components

BS 5667-6:1979

Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: rotary feeders used in pneumatic handling

0 580 10506 7

Keywords: Conveyors, Materials handling equipment, Bulk materials, Materials handling, Pneumatic conveyors, Pneumatic equipment, Feeders (materials handling equipment), Rotary feeders, Loading and unloading devices, Rotational motion, Safety measures, Occupational safety, Accident prevention, Design, Installation, Maintenance, Materials handling components

BS 5667-7:1979

Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: rotary drum feeders and rotary vane feeders

0 580 10507 5

Keywords: Conveyors, Materials handling equipment, Bulk materials, Materials handling, Feeders (materials handling equipment), Rotary feeders, Loading and unloading devices, Rotational motion, Safety measures, Occupational safety, Accident prevention, Design, Installation, Maintenance, Materials handling components

BS 5667-8:1979

Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: hand-operated power shovels

0 580 10508 3

Keywords: Conveyors, Materials handling equipment, Bulk materials, Materials handling, Shovels, Mechanically-operated devices, Velocity, Safety measures, Occupational safety, Accident prevention, Design, Installation, Maintenance, Materials handling components

BS 5667-9:1979

Specification for continuous mechanical handling equipment - safety requirements. Loose bulk materials: bulk throwing machines

0 580 10510 5

Keywords: Conveyors, Materials handling equipment, Bulk materials, Materials handling, Bulk throwing loaders, Throwing machines, Loading and unloading devices, Materials handling components, Safety measures, Occupational safety, Accident prevention, Design, Installation, Maintenance

BS 5965:1980

Specification for manually driven balanced personal homelifts

0 580 11477 5

Summary: Minimum safety rules related to the design, construction, installation, operation and maintenance of manually driven balanced personal homelifts which are to be specifically used by nominated disabled persons. These lifts are normally hand-wound from the carriage but may also be hand-wound by an attendant.

Keywords: Passenger lifts, Manually-operated devices, Lifts, Domestic facilities, Aids for the disabled, Installation, Design, Accident prevention, Safety measures, Signs, Maintenance, Domestic safety

BS 6109-2:1989

Tail lifts, mobile lifts and ramps associated with vehicles. Code of practice for passenger lifts and ramps

0 580 17116 7

Summary: Provides design and safety recommendations, operating procedures, installation and inspection recommendations for appliances for assisting entry or exit of passengers with or without wheelchairs, into and out of vehicles to a floor height of not more than 1700 mm.

Keywords: Tail lifts, Passenger hoists, Hoists, Lifting equipment, Mobile working platforms, Ramps, Safety measures, Installation, Performance testing, Hazards, Accident prevention, Hydraulic equipment, Marking, Maintenance, Safety devices, Road vehicle bodies, Aids for the disabled, Grades (quality), Size, Safe working load, Factor of safety, Design, Velocity, Inspection, Wire ropes, Pulleys, Chains, Noise (environmental)

BS 6164:2001

Code of practice for safety in tunnelling in the construction industry

0 580 38457 8

Keywords: Tunnelling, Construction operations, Excavating, Tunnelling equipment, Tunnels, Trenches, Maintenance, Repair, Safety measures, Occupational safety, Safety devices, Equipment safety, Accident prevention

BS 6262-4:2005

Glazing for buildings. Code of practice for safety related to human impact

0 580 46772 4

Keywords: Glazing, Glass, Window glass, Plastics, Sheet materials, Sheet glass, Windows, Construction systems parts, Buildings, Accidents, Accident prevention, Safety measures, Mechanical effects (human body), Design, Selection, Impact strength, Performance, Doors, Dimensions, Marking, Shields

BS 6440:1999

Powered lifting platforms for use by disabled persons. Code of practice

0 580 33031 1

Keywords: Passenger lifts, Aids for the disabled, Lifts, Lifting equipment, Installation, Design, Lighting systems, Accident prevention, Safety measures, Factor of safety, Safety devices, Electrically-operated devices, Manually-operated devices, Hydraulically-operated devices, Doors, Gates, Barriers, Platforms, Electrical equipment, Maintenance, Signs, Electrical testing, Inspection, Instructions for use, Certification (approval), Acceptance (approval)

BS 6912-18:1995

Safety of earth-moving machinery. Specification for bluntness of edges at the operator station and in maintenance areas

0 580 24291 9

Summary: Defines the permissible limits of sharpness of edges and corners to reduce injury risk to operators and maintenance personnel.

Keywords: Earth-moving equipment, Equipment safety, Safety measures, Materials handling equipment, Construction equipment, Occupational safety, Cabs, Work stations, Sharp, Edge, Radius, Accident prevention, Dimensions, Chamfered

ISO 12508:1994

Safety of earth-moving machinery. Specification for bluntness of edges at the operator station and in maintenance areas

0 580 24291 9

Summary: Defines the permissible limits of sharpness of edges and corners to reduce injury risk to operators and maintenance personnel.

Keywords: Earth-moving equipment, Equipment safety, Safety measures, Materials handling equipment, Construction equipment, Occupational safety, Cabs, Work stations, Sharp, Edge, Radius, Accident prevention, Dimensions, Chamfered

BS 7121-3:2000

Code of practice for safe use of cranes. Mobile cranes

0 580 33158 X

Keywords: Cranes, Lifting equipment, Safety measures, Mobile cranes, Accident prevention, Occupational safety, Equipment safety, Lifting, Materials handling operations, Operators (personnel), Personnel, Construction workers, Selection, Safety devices, Safe working load, Planning, Records (documents), Siting, Erecting (construction operation), Materials handling, Hazards, Inspection, Maintenance, Legislation, Piling

BS 7121-4:1997

Code of practice for safe use of cranes. Lorry loaders

0 580 27121 8

Summary: Recommendations for the safe use of lorry loaders when they are used as cranes. Includes management, procedures, precautions, testing, examination, inspection and maintenance.

Keywords: Cranes, Lifting equipment, Safety measures, Materials handling equipment, Loading (materials handling), Materials handling operations, Commercial road vehicles, Road vehicles, Accident prevention, Personnel, Job specification, Recruitment, Safety devices, Siting, Hazards, Overhead power lines, Electrical safety, Weather, Maintenance, Loaders, Inspection, Volume, Load capacity, Winches, Performance testing, Testing conditions, Loading, Mechanical testing, Hand signals

BS 7272-1:2008

Writing and marking instruments. Specification for caps to reduce the risk of asphyxiation

978 0 580 59994 1

Keywords: Pens, Caps (closures), Closures, Childproof equipment, Safety devices, Stationery, Writing, Marking, Safety measures, Accident prevention, Domestic safety, Ventilation, Air, Dimensions, Flow measurement, Pressure testing, Flow rates, Test equipment

BS 7883:2005

Code of practice for the design, selection, installation, use andmainten ance of anchor devices conforming to BS EN 795

978 0 580 59895 1

Keywords: Safety anchorages, Safety harnesses, Industrial, Structural members, Restraint systems (protective), Safety lines, Safety devices, Classification systems, Design, Inspection, Installation, Examination (quality assurance), Instructions for use, Falling (accident), Accident prevention, Marking

BS 7985:2002

Code of Practice for the use of rope access methods for industrial purposes

0 580 38790 9

Keywords: Harnesses, Safety harnesses, Ropes, Access, Industrial, Fall arrest systems, Accident prevention

BS 8008:1996+A1:2008

Safety precautions and procedures for the construction and descent of machine-bored shafts for piling and other purposes

978 0 580 63663 9

Summary: Guidance on safety and procedures to be taken where it is required to lower personnel into a shaft greater than 750 mm diameter.

Keywords: Safety engineering, Occupational safety, Safety measures, Emergency measures, Accident prevention, Rescue, Rescue equipment, Underground, Lighting systems, Safety harnesses, Breathing apparatus, Construction equipment, Lifting equipment, Hoists, Passenger hoists, Air compressors, Personnel, Construction workers, Training, Communication equipment, Hazards, Working conditions (physical), Industrial accidents, Piling, Site investigations, Construction operations, Foundations, Pile foundations, Trenches, Access, Barriers, Guard rails, Restraint systems (protective), Hoisting cages, Dangerous materials, Toxic materials, Earthworks

BS 8213-1:2004

Windows doors and rooflights. Design for safety in use and during cleaning of windows, including door-height windows and roof windows. Code of practice

0 580 44492 9

Keywords: Windows, Cleaning, Window panes, Glazing, Rooflights, Doors, Occupational safety, Safety measures, Design, Maintenance, Opening windows, Accident prevention

BS 8437:2005

Code of practice for selection, use and maintenance of personal fall protection systems and equipment for use in the workplace

0 580 45817 2

Keywords: Fall arrest systems, Safety lines, Safety anchorages, Restraint systems (protective), Safety devices, Occupational safety, Accident prevention, Falling (accident), Ropes, Rescue equipment, Selection, Maintenance, Inspection, Risk assessment

BS 8460:2005

Safe use of MEWPs. Code of practice

0 580 47754 1

Keywords: Lifting equipment, Mobile working platforms, Elevating-platform trucks, Passenger hoists, Hoists, Materials handling equipment, Safety measures, Accident prevention, Occupational safety, Hazards, Personnel, Training, Maintenance, Inspection

BS 848-5:1999

Fans for general purposes. Special for mechanical safety (guarding)

0 580 35221 8

Keywords: Fans, Fluid equipment, Electrical equipment, Protected electrical equipment, Ventilation, Electrical safety, Safety measures, Accident prevention, Occupational safety, Machine guards, Grilles, Hazards, Classification systems, Components, Assembling, Sheet materials, Meshes, Design, Noise (environmental), Instructions for use, Marking

BS EN 1012-1:1997

Compressors and vacuum pumps. Safety requirements. Compressors

0 580 26279 0

Keywords: Compressors, Vacuum pumps, Fluid equipment, Safety measures, Accident prevention, Oxygen, Acetylene, Safety engineering, Electrical safety, Equipment safety, Noise (environmental), Occupational safety, Fire safety, Hazards, Failure (mechanical), Verification, Design, Ergonomics, Marking, Instructions for use, Pressure testing, Test pressure, Stability, Leak tests, Signs, Colour, Symbols, Maintenance, Installation, Relief valves, Safety devices, Explosive atmospheres

BS EN 1012-2:1997

Compressors and vacuum pumps. Safety requirements. Vacuum pumps

0 580 26280 4

Keywords: Compressors, Vacuum pumps, Fluid equipment, Safety measures, Accident prevention, Pumps, Safety engineering, Electrical safety, Equipment safety, Noise (environmental), Occupational safety, Hazards, Radiation hazards, Failure (mechanical), Verification, Design, Ergonomics, Marking, Instructions for use, Installation, Maintenance, Pressure testing, Stability, Leak tests, Signs, Colour, Symbols

BS EN 1035:1999

Tannery machines. Moving platen machinery. Safety requirements

0 580 30543 0

Keywords: Leather-working equipment, Tanning materials, Tanning, Leather, Hides, Safety measures, Machine tables, Specification (approval), Test equipment, Equipment safety, Accident prevention, Occupational safety, Instructions for use, Hazards, Vacuum-operated devices

BS EN 1082-1:1997

Protective clothing. Gloves and arm guards protecting against cuts and stabs by hand knives. Chain mail gloves and arm guards

0 580 27470 5

Keywords: Protective gloves, Protective clothing, Arm guards (clothing), Safety devices, Occupational safety, Accident prevention, Link chains, Arms, Hand tools, Knives (tools), Metals, Plastics, Design, Dimensions, Straps, Weight (mass), Tensile strength, Test specimens, Temperature, Performance, Visual inspection (testing), Dimensional measurement, Dimensional tolerances, Tensile testing, Penetration tests, Testing conditions, Specimen preparation, Marking, Instructions for use, Size, Cuffs, Colour codes, Selection, Degradation

BS EN 1082-2:2000

Protective clothing. Gloves and arm guards protecting against cuts and stabs by hand knives. Gloves and arm guards made of material other than chain mail

0 580 34611 0

Keywords: Protective gloves, Protective clothing, Arm guards (clothing), Safety devices, Occupational safety, Accident prevention, Sleeves (clothing), Cloth, Textiles, Leather, Plastics, Cut-through tests, Penetration tests, Strength of materials, Ergonomics

BS EN 1082-3:2000

Protective clothing. Gloves and arm guards protecting against cuts and stabs by hand knives. Impact cut test for fabric, leather and other materials

0 580 34713 3

Keywords: Protective gloves, Protective clothing, Arm guards (clothing), Safety devices, Occupational safety, Accident prevention, Motor cyclists, Cloth, Leather, Impact testing, Penetration tests, Knives (tools), Textile testing, Fabric testing

BS EN 1114-1:1997

Rubber and plastics machines. Extruders and extrusion lines. Safety requirements for extruders

0 580 27068 8

Keywords: Plastics and rubber technology, Extruding machines, Machine tools, Production equipment, Safety engineering, Accident prevention, Safety measures, Safety devices, Hazards, Design, Electrical safety, Noise (environmental), Verification, Instructions for use

BS EN 1114-2:1998

Rubber and plastics machines. Extruders and extrusion lines. Safety requirements for die face pelletizers

0 580 29749 7

Summary: Specifies the safety requirements for the design and construction of underwater, water ring, dry, centrifugal and knife rotor pelletizers.

Keywords: Plastics and rubber technology, Extruding machines, Machine tools, Production equipment, Facing tools, Pellets, Safety measures, Occupational safety, Accident prevention, Design, Assembling, Stability, Hazards, Electrical safety, Control systems, Safety devices, Noise (environmental), Dangerous materials, Hazardous areas classification (for electrical equipment), Electrical equipment, Cut-out devices, Acoustic measurement, Conformity, Verification, Marking, Instructions for use, Handbooks

BS EN 1149-2:1997

Protective clothing. Electrostatic properties. Test method for measurement of the electrical resistance through a material (vertical resistance)

0 580 28692 4

Keywords: Protective clothing, Electrostatics, Antistatic materials, Clothing, Occupational safety, Resistance measurement, Electrical resistance, Vertical, Accident prevention, Safety measures, Testing conditions, Test specimens, Test equipment, Circuit diagrams, Electrodes

BS EN 115:1995

Safety rules for the construction and installation of escalators and passenger conveyors.

0 580 24707 4

Keywords: Escalators, Passenger conveyors, Conveyors, Equipment safety, Safety measures, Accident prevention, Enclosures, Doors, Balustrades, Hand-rails, Dimensions, Angles (geometry), Velocity, Lighting levels, Equipment housing facilities, Stopping, Switches, Deflection tests, Testing conditions, Mechanical testing, Steps (stairs), Pallets, Conveyor belts, Mechanical transmission systems, Clearances, Braking systems, Safety devices, Electrical installations, Electrical safety, Signs, Control equipment, Instructions for use, Marking, Inspection, Printed-circuit boards, Design, Environmental testing

BS EN 1150:1999

Protective clothing. Visibility clothing for non-professional use. Test methods and requirements

0 580 32130 4

Keywords: High-visibility materials, Reflective materials, Clothing, Protective clothing, Performance, Optical properties of materials, Design, Colour, Luminance, Chromaticity, Accident prevention, Colour fastness, Angles (geometry), Performance testing, Photometry (light measurement), Retroreflective materials, Testing conditions, Test specimens, Specimen preparation, Abrasion, Folding, Thermal-shock tests, Washing, Dry cleaning, Marking, Instructions for use

BS EN 1175-1:1998

Safety of industrial trucks. Electrical requirements. General requirements for battery powered trucks

0 580 29138 3

Keywords: Industrial trucks, Materials handling equipment, Electrical safety, Safety measures, Accident prevention, Occupational safety, Powered industrial trucks, Battery-powered devices, Electrically-operated devices, Rated voltage, Rated current, Hazards, Environment (working), Instructions for use, Control systems, Control equipment, Switches, Protected electrical equipment, Electric enclosures, Electric cells, Containers, Lead-acid batteries, Nickel-cadmium batteries, Electric connectors, Electric conductors, Circuits, Electrical components, Type testing, Electrical testing, Electrical insulation, Electrical resistance, Overload (electric), Dielectric-strength tests, Temperature-rise limit, Temperature measurement, Endurance testing, Environmental testing, Cold tests, Chemical-resistance tests, Drop tests, Velocity, Overspeed tests, Testing conditions

BS EN 1175-2:1998

Safety of industrial trucks. Electrical requirements. General requirements for internal combustion engine powered trucks

0 580 29139 1

Keywords: Industrial trucks, Materials handling equipment, Electrical safety, Safety measures, Accident prevention, Occupational safety, Electrical installations, Internal combustion engines, Powered industrial trucks, Hazards, Environment (working), Safety devices, Control systems, Switches, Circuits, Electric conductors, Flexible conductors, Storage batteries, Instructions for use, Electrical components, Ratings, Rated voltage, Design

BS EN 1175-3:1998

Safety of industrial trucks. Electrical requirements. Specific requirements for the electric power transmission systems of internal combustion engine powered trucks

0 580 29140 5

Keywords: Industrial trucks, Materials handling equipment, Electrical safety, Safety measures, Accident prevention, Occupational safety, Powered industrial trucks, Internal combustion engines, Electrical transmission systems, Power transmission systems, Equipment safety, Hazards, Design, Marking, Instructions for use, Ratings, Rated voltage, Environment (working), Safety devices, Control devices, Control equipment, Electrical equipment, Contactors, Switches, Electric enclosures, Protected electrical equipment, Electric generators, Direct-current generators, Electric machines, Electric motors, Direct-current motors, Electric conductors, Type testing, Electrical testing, Dielectric-strength tests, Electrical insulation, Electrical resistance, Testing conditions

BS EN 1176-5:1999

Playground equipment. Additional specific safety requirements and test methods for carousels

0 580 30682 8

Summary: Supplementary requirements for carousels to be used in conjunction with BS EN 1176-1:1998.

Keywords: Playground equipment, Playgrounds, Outdoor sports equipment, Leisure equipment, Safety measures, Equipment safety, Classification systems, Dimensions, Accident prevention, Stability, Length, Height, Clearance distances, Surfacing (exterior spaces), Rotation velocity, Load capacity, Rotating parts, Mechanical transmission systems, Mechanical components, Mechanical testing, Tensile strength, Strength of materials, Tensile testing, Marking, Testing conditions

BS EN 12128:1998

Biotechnology. Laboratories for research, development and analysis. Containment levels of microbiology laboratories, areas of risk, localities and physical safety requirements

0 580 30066 8

Keywords: Biotechnology, Laboratories, Biological hazards, Microbiology, Accident prevention, Microorganisms, Classification systems, Installation, Cleaning, Ventilation, Personnel, Occupational safety, Testing conditions, Waste disposal, Washing

BS EN 1218-2:2004

Safety of woodworking machines. Tenoning machines. Double end tenoning and/or profiling machines fed by chain or chains

0 580 44149 0

Keywords: Woodworking machines, Safety measures, Tenons, Machine tools, Machines working by stock removal, Equipment safety, Occupational safety, Safety devices, Tenoning machines, Machine tool components, Chain drives, Tenon-driven cutters, Cutting tools, Hazards, Accident prevention, Chipboards, Fibre building board, Plywood, Wood products

BS EN 1218-4:2004

Safety of woodworking machines. Tenoning machines. Edge banding machines fed by chain(s)

0 580 44148 2

Keywords: Woodworking machines, Tenoning machines, Tenons, Machine tools, Machines working by stock removal, Equipment safety, Occupational safety, Safety measures, Safety devices, Accident prevention, Chain drives, Edge

BS EN 1218-5:2004

Safety of woodworking machines. Tenoning machines. One side profiling machines with fixed table and feed rollers or fed by chain

0 580 44147 4

Keywords: Woodworking machines, Tenons, Machine tools, Safety measures, Occupational safety, Safety devices, Machines working by stock removal, Equipment safety, Profile, Tenoning machines, Machine tool components, Manually-operated devices, Working range, Hazards, Accident prevention, Chipboards, Fibre building board, Plywood, Wood products

BS EN 12307:1998

Biotechnology. Large-scale process and production. Guidance for good practice, procedures, training and control for personnel

0 580 29261 4

Keywords: Biotechnology, Microbiology, Microorganisms, Genetic engineering, Production processes, Mass production, Process control, Classification systems, Biological hazards, Isolating equipment (biomedical), Occupational safety, Accident prevention, Safety measures, Personnel, Training, Instructions for use

BS EN 1231:1997

Workplace atmospheres. Short term detector tube measurement systems. Requirements and test methods

0 580 27498 5

Keywords: Gas detectors, Air pollution, Air, Detectors, Glass tubes, Temperature, Stability, Environment (working), Leak tests, Pressure testing, Concentration (chemical), Occupational safety, Safety devices, Accident prevention, Pumps, Volume measurement, Performance, Accuracy, Calibration, Graduations, Marking, Test equipment, Life (durability), Instructions for use

BS EN 12347:1998

Biotechnology. Performance criteria for steam sterilizers and autoclaves

0 580 29944 9

Keywords: Biotechnology, Biological hazards, Steam sterilizers, Sterilizers, Autoclaves, Microorganisms, Classification systems, Leak tests, Cleaning, Sterilization (hygiene), Verification, Accident prevention, Marking, Packaging, Documents, Performance

BS EN 12387:2005

Footwear, leather and imitation leather goods manufacturing machines. Modular shoe repair equipment. Safety requirements

0 580 45508 4

Keywords: Shoe machinery, Footwear, Leather products, Repair, Safety measures, Occupational safety, Equipment safety, Orthopaedic equipment, Leather-working equipment, Production equipment, Accident prevention, Hazards, Safety engineering, Health and safety requirements, Leather industry

BS EN 12415:2001

Safety of machine tools. Small numerically controlled turning machines and turning centres

0 580 36279 5

Keywords: Machine tools, Machine tool components, Centres (machine tool components), Numerical control, Safety measures, Accident prevention, Equipment safety, Occupational safety

BS EN 12462:1998

Biotechnology. Performance criteria for pumps

0 580 30175 3