Keyword: Accelerated testing
British Standards Institute, BSI



Go to All Keywords 		BSI Standards
picture picture picture picture picture picture
BS 2000-138:2002
Methods of test for petroleum and its products. Determination of oxidation stability of aviation fuel. Potential residue method
0 580 46180 7
Summary: Identical with IP 138:2002.
Keywords: Petroleum products, Petroleum, Chemical analysis and testing, Aviation fuels, Fuels, Stability, Oxidation resistance, Chemical-resistance tests, Gums, Determination of content, Artificial ageing tests, Accelerated testing
BS 2011-2.2Kd:1984
Environmental testing. Guidance. Test Kd. Guidance on Test Kd: Hydrogen sulphide test for contacts and connections
0 580 13722 8
Summary: Describes the mechanism of corrosion of contacts, particularly with respect to the concentration of hydrogen sulphide and the effects of humidity and temperature to which they may be exposed. The significance of the parameters in Test Kd is covered.
Keywords: Environmental testing, Electric contacts, Electric connectors, Electrical equipment, Electrical components, Tarnish, Silver, Silver alloys, Corrosion tests, Gas-resistance tests, Hydrogen sulphide, Contact resistance, Accelerated corrosion tests, Accelerated testing
IEC 60068-2-46:1982
Environmental testing. Guidance. Test Kd. Guidance on Test Kd: Hydrogen sulphide test for contacts and connections
0 580 13722 8
Summary: Describes the mechanism of corrosion of contacts, particularly with respect to the concentration of hydrogen sulphide and the effects of humidity and temperature to which they may be exposed. The significance of the parameters in Test Kd is covered.
Keywords: Environmental testing, Electric contacts, Electric connectors, Electrical equipment, Electrical components, Tarnish, Silver, Silver alloys, Corrosion tests, Gas-resistance tests, Hydrogen sulphide, Contact resistance, Accelerated corrosion tests, Accelerated testing
BS 2775:1987
Specification for rubber stoppers and tubing for general laboratory use
0 580 16138 2
Summary: Requirements for rubber used and dimensions.
Keywords: Laboratory equipment, Laboratory ware, Closures, Stoppers, Pipes, Flexible pipes, Flexible tubing, Polymers, Natural rubber, Synthetic rubber, Isoprene rubber, Styrene-butadiene rubber, Chloroprene rubber, Ethylene-propylene rubber, Silicone rubber, Fluorocarbons, Hardness, Tensile strength, Elongation at fracture, Compression set, Heat ageing tests, Ageing tests, Accelerated testing, Specimen preparation, Dimensions, Colour codes, Marking, Ageing (materials), Test specimens
BS 2782-1:Method 131B:1983
Methods of testing plastics. Thermal properties. Determination of extensibility after heat ageing of flexible polyvinyl chloride sheet
0 580 13175 0
Summary: Form and number of test specimens, procedure and report. Applies the extensibility test of Method 150C.
Keywords: Plastics and rubber technology, Plastics, Polyvinyl chloride, Sheet materials, Flexible materials, Polymers, Extensibility, Mechanical testing, Ageing tests, Heating tests, Thermal testing, Testing conditions, Specimen preparation, Accelerated testing
BS 2782-5:Method 540B:1982
Methods of testing plastics. Optical and colour properties, weathering. Methods of exposure to laboratory light sources, (xenon arc lamp, enclosed carbon arc lamp, open-flame carbon arc lamp, fluorescent tube lamps)
0 580 12509 2
Keywords: Plastics and rubber technology, Plastics, Optical properties of materials, Weathering, Colorimetric characteristics, Polymers, Environmental testing, Light, Artificial weathering tests, Accelerated testing, Colour tests, Testing conditions, Test specimens
ISO 4892:1981
Methods of testing plastics. Optical and colour properties, weathering. Methods of exposure to laboratory light sources, (xenon arc lamp, enclosed carbon arc lamp, open-flame carbon arc lamp, fluorescent tube lamps)
0 580 12509 2
Keywords: Plastics and rubber technology, Plastics, Optical properties of materials, Weathering, Colorimetric characteristics, Polymers, Environmental testing, Light, Artificial weathering tests, Accelerated testing, Colour tests, Testing conditions, Test specimens
BS 2782-5:Method 540G:1995
Methods of testing plastics. Optical and colour properties, weathering. Methods of exposure to laboratory light sources. Open flame carbon-arc lamps
0 580 245039
Keywords: Plastics and rubber technology, Plastics, Optical properties of materials, Weathering, Colorimetric characteristics, Polymers, Artificial weathering tests, Environmental testing, Artificial ageing tests, Solar radiation, Accelerated testing, Test equipment, Testing conditions, Arc lamps, Carbon
ISO 4892-4:1994
Methods of testing plastics. Optical and colour properties, weathering. Methods of exposure to laboratory light sources. Open flame carbon-arc lamps
0 580 245039
Keywords: Plastics and rubber technology, Plastics, Optical properties of materials, Weathering, Colorimetric characteristics, Polymers, Artificial weathering tests, Environmental testing, Artificial ageing tests, Solar radiation, Accelerated testing, Test equipment, Testing conditions, Arc lamps, Carbon
BS 2G 238:1996
Specification for electric cables for general airframe or equipment interconnect use (260$0DC), nickel plated copper and copper alloy conductors, with wrapped insulation
0 580 24798 8
Keywords: Electric cables, Single-core cables, Multicore cables, Insulated cables, Classification systems, Aircraft components, Airframes, Marking, Elongation, Diameter, Electrical resistance, Electrical components, Nickel, Electroplating, Metal coatings, Temperature, Rated current, Performance, Performance testing, Approval testing, Ageing tests, Accelerated testing, Bend testing, Specimen preparation, Thickness, Mass, Testing conditions, Tensile strength, Electrical insulating materials, Wrapping, Ratings, Linear electrical resistance, Copper, Copper alloys, Designations
BS 3424-12:1996
Testing coated fabrics. Accelerated ageing tests
0 580 25618 9
Summary: Describes four methods of assessing the resistance of coated fabrics to deterioration by accelerated ageing.
Keywords: Coated fabrics, Fabric testing, Textile testing, Natural rubber, Synthetic rubber, Plastics, Coated materials, Artificial ageing tests, Ageing tests, Heat ageing tests, Accelerated testing, Volatile matter determination, Test specimens, Testing conditions, Polyvinyl chloride, Damp-heat tests, Tropical tests, Environmental testing, Light, Nitrocelluloses, Physical testing, Temperature
ISO 1419:1995
Testing coated fabrics. Accelerated ageing tests
0 580 25618 9
Summary: Describes four methods of assessing the resistance of coated fabrics to deterioration by accelerated ageing.
Keywords: Coated fabrics, Fabric testing, Textile testing, Natural rubber, Synthetic rubber, Plastics, Coated materials, Artificial ageing tests, Ageing tests, Heat ageing tests, Accelerated testing, Volatile matter determination, Test specimens, Testing conditions, Polyvinyl chloride, Damp-heat tests, Tropical tests, Environmental testing, Light, Nitrocelluloses, Physical testing, Temperature
BS 3900-F10:1985
Methods of test for paints. Determination of resistance to cathodic disbonding of coatings for use in marine environments
0 580 14167 5
Summary: Describes a procedure, based on COIPM method, for evaluating coatings that are for use with cathodic protection systems on marine structures.
Keywords: Paints, Coatings, Varnishes, Environmental testing, Adhesion tests, Marine environment tests, Circuits, Chemical-resistance tests, Cathodic protection, Design, Corrosion tests, Accelerated testing, Dimensions, Test equipment, Corrosion protection, Peeling tests, Artificial weathering tests, Visual inspection (testing), Testing conditions, Test specimens, Panels, Specimen preparation, Electrochemical corrosion, Flaw detection
BS 3900-F11:1985
Methods of test for paint. Durability tests on paint films. Determination of resistance to cathodic disbonding of coatings for use on land-based buried structures
0 580 14162 4
Summary: Describes a procedure, based on British Gas method, for evaluating coatings that are for use with cathodic protection systems on sub-soil structures.
Keywords: Paints, Coatings, Varnishes, Environmental testing, Adhesion tests, Chemical-resistance tests, Pipelines, Underground, Cathodic protection, Corrosion tests, Underground corrosion, Accelerated testing, Peeling tests, Testing conditions, Gas pipelines, Dimensions, Design, Specimen preparation, Test specimens, Panels, Test equipment, Circuits, Visual inspection (testing), Flaw detection, Corrosion protection, Artificial weathering tests, Electrochemical corrosion
BS 3G 100-2.3.1:1969
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Vibration
0 580 05535 3
Keywords: Aircraft components, Airframes, Vibration testing, Vibration, Air transport engineering, Environment (working), Environmental testing, Endurance testing, Performance, Durability, Subsonic aircraft, Aircraft propellers, Powered aircraft, Test duration, Testing conditions, Fatigue, Accelerated testing, Performance testing
BS 4443-4:1989
Methods of test for flexible cellular materials. Method 10. Determination of solvent swelling
0 580 16927 8
Keywords: Polymers, Cellular materials, Flexible materials, Plastics, Solvents, Swelling, Specimen preparation, Testing conditions, Humidity, Accelerated testing, Ageing tests, Heat ageing tests, Dimensional measurement, Damp-heat tests
BS 5117-2.2:1985
Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for corrosion inhibition performance. Glassware tests
0 580 14357 0
Summary: Specifies apparatus, procedure and reporting of results for hot and cold immersion tests.
Keywords: Antifreezes, Corrosion inhibitors, Coolants, Internal combustion engines, Cooling systems, Engine components, Physico-chemical methods, Corrosion tests, Laboratory glassware, Accelerated testing, Test equipment, Immersion tests (corrosion)
BS 5131-5.7:1978
Methods of test for footwear and footwear materials. Testing of complete footwear. Fatigue test for rigid units and shoe bottoms
0 580 10228 9
Summary: Test reproducing the effects of the repeated forces applied to the unit in normal walking.
Keywords: Footwear, Fatigue testing, Bend testing, Mechanical testing, Test equipment, Specimen preparation, Bottom, Accelerated testing
BS 5421-1:1976
Methods of test for elastomeric threads. Rubber threads
0 580 09119 8
Summary: Conditioning of samples or test pieces, count, metric yield, density, tensile strength, elongation at break, stress at predetermined elongation, elongation under a specific load, stress retention, accelerated ageing test on rubber threads in a relaxed state; ribbons: degree of adhesion between threads.
Keywords: Elastomers, Thread (textiles), Natural rubber, Synthetic rubber, Specimen preparation, Size classification, Density measurement, Tensile testing, Mechanical testing, Elongation at fracture, Adhesion tests, Ageing tests, Accelerated testing, Test equipment
BS 546:Supplement No. 1:1960
Specification for plugs made of resilient material
0 580 00577 1
Summary: Requirements for plugs, made substantially of rubber or other suitable resilient material, which are not included in BS 546 but which comply with it in other respects.
Keywords: Electric plugs, Electric connectors, Electric pins, Electric terminals, Resilience, Natural rubber, Synthetic rubber, Marking, Electrical testing, Deflection tests, Mechanical testing, Artificial ageing tests, Accelerated testing, Test equipment
BS 5699-1:1979
Processed photographic film for archival records. Specifications for silver-gelatin type on cellulose ester base
0 580 10654 3
Summary: Requirements for processed black-and-white films having silver-gelatin type emulsions on safety cellulose ester type bases.
Keywords: Photographic materials, Photographic film, Archive documents, Silver, Gelatin, Cellulose ester fibres, Storage, Preservation, Microfilm, Motion-picture film, Roll film, Sheet film, Monochrome photographic film, Physical properties of materials, Thiosulfates, Chemical analysis and testing, Ageing tests, Accelerated testing, Viscosity measurement, Adhesion tests, Flexibility, Mechanical testing, Stability, Developing (photography)
BS 5761-1:1989
Wood preservatives. Accelerated ageing of treated wood prior to biological testing. Evaporative ageing procedure
0 580 17300 3
Summary: Test specimens prepared for biological testing are exposed to current of air prior to test.
Keywords: Wood, Wood preservation, Wood preservatives, Ageing (materials), Biological analysis and testing, Accelerated testing, Test specimens, Specimen preparation, Evaporation
BS 6161-7:1984
Methods of test for anodic oxidation coatings on aluminium and its alloys. Accelerated determination of light fastness of coloured anodic oxidation coatings using artificial light
0 580 14023 7
Keywords: Coatings, Aluminium, Aluminium alloys, Electrodeposition, Anodizing, Protective coatings, Accelerated testing, Light, Environmental testing, Colour-fastness tests, Colour tests, Comparative tests, Artificial lighting, Quality control, Calibration, Visual inspection (testing)
BS 6221-2:1991
Printed wiring boards. Methods of test
0 580 19085 4
Summary: Test methods and procedures including environmental conditioning for printed boards.
Keywords: Printed-circuit boards, Printed circuits, Electronic equipment and components, Visual inspection (testing), Electrical testing, Electric conductors, Electrical connections, Holes, Thermal-cycling tests, Thermal testing, Mechanical testing, Peeling tests, Adhesion tests, Metal coatings, Flatness (surface), Porosity measurement, Solderability testing, Ageing tests, Fluxes (materials), Chemical-resistance tests, Specimen preparation, Thermal-shock tests, Environmental testing, Accelerated testing, Test equipment, Steam, Oxygen, Testing conditions, Soldering
BS 6388-1:1991
Accelerated ageing of paper and board. Method for dry heat treatment at 105$0DC
0 580 19801 4
Keywords: Paper, Board (paper), Ageing tests, Paper products, Accelerated testing, Artificial ageing tests, Heat ageing tests, Dry-heat tests, Test equipment, Specimen preparation, Ageing (materials), Bibliography
ISO 5630-1:1991
Accelerated ageing of paper and board. Method for dry heat treatment at 105$0DC
0 580 19801 4
Keywords: Paper, Board (paper), Ageing tests, Paper products, Accelerated testing, Artificial ageing tests, Heat ageing tests, Dry-heat tests, Test equipment, Specimen preparation, Ageing (materials), Bibliography
BS 6388-2:1987
Accelerated ageing of paper and board. Method for dry heat treatment at 120$0DC or 150$0DC
0 580 16084 X
Summary: Primarily intended for high purity papers such as are used in electrical equipment.
Keywords: Paper, Board (paper), Ageing tests, Heat ageing tests, Dry-heat tests, Heat treatment, Test equipment, Testing conditions, Specimen preparation, Paper products, Artificial ageing tests, Accelerated testing, Solid electrical insulating materials
ISO 5630-4:1986
Accelerated ageing of paper and board. Method for dry heat treatment at 120$0DC or 150$0DC
0 580 16084 X
Summary: Primarily intended for high purity papers such as are used in electrical equipment.
Keywords: Paper, Board (paper), Ageing tests, Heat ageing tests, Dry-heat tests, Heat treatment, Test equipment, Testing conditions, Specimen preparation, Paper products, Artificial ageing tests, Accelerated testing, Solid electrical insulating materials
BS 6388-3:1996
Accelerated ageing of paper and board. Method for moist heat treatment at 80$0DC and 65% relative humidity
0 580 26412 2
Keywords: Paper, Board (paper), Ageing tests, Heat ageing tests, Heat treatment, Test equipment, Testing conditions, Specimen preparation, Damp-heat tests, Humidity, Accelerated testing, Artificial ageing tests, Environmental testing
ISO 5630-3:1996
Accelerated ageing of paper and board. Method for moist heat treatment at 80$0DC and 65% relative humidity
0 580 26412 2
Keywords: Paper, Board (paper), Ageing tests, Heat ageing tests, Heat treatment, Test equipment, Testing conditions, Specimen preparation, Damp-heat tests, Humidity, Accelerated testing, Artificial ageing tests, Environmental testing
BS 7044-2.4:1989
Artificial sports surfaces. Methods of test. Methods for determination of environmental resistance
0 580 17212 0
Summary: Methods for the determination of resistance to ozone, air ageing, water and artificial weathering.
Keywords: Sports equipment, Leisure equipment, Surfaces, Floor coverings, Heat ageing tests, Ageing tests, Ozone, Chemical-resistance tests, Air, Environmental testing, Artificial weathering tests, Water, Water-resistance tests, Testing conditions, Laboratory testing, Accelerated testing, Artificial sports surfaces
BS 812-114:1989
Testing aggregates. Method for determination of the polished-stone value
0 580 17088 8
Keywords: Aggregates, Cement and concrete technology, Roadstone aggregates, Polishing, Mechanical testing, Friction tests, Accelerated testing, Testing conditions, Test equipment, Specimen preparation, Calibration, Reproducibility
BS 903-A52:1986
Physical testing of rubber. Determination of ageing characteristics by measurement of stress at a given elongation
0 580 15466 1
Summary: Describes three methods. Appendix A reproduces the details of ISO 1826.
Keywords: Natural rubber, Synthetic rubber, Vulcanized rubber, Physical testing, Plastics and rubber technology, Ageing tests, Heat ageing tests, Elongation, Stress, Stress relaxation, Strain elongation, Strain measurement, Testing conditions, Test equipment, Test specimens, Accelerated testing, Vulcanized materials, Thermal testing
BS 9300:1969
Specification for semiconductor devices of assessed quality: generic data and methods of test
0 580 05681 3
Summary: Forms part of the system of standards for electronic components of assessed quality. Terms, definitions, test methods and other material necessary to implement fully the detail specifications for semiconductor devices. Included in section 2 are the general rules for preparation of detail specifications. Appendix C gives the agreed procedure for the adoption of specifications in the CV7000 series into the BS 9000 system. See also PD 6460.
Keywords: Semiconductor devices, Electronic equipment and components, Quality assurance systems, Assessed quality, Qualification approval, Approval testing, Quality factor, Inspection, Specification (approval), Definitions, Marking, Colour codes, Sampling methods, Ratings, Rated voltage, Visual inspection (testing), Testing conditions, Defects, Environmental testing, Fire tests, Flammability, Mechanical testing, Solvent-resistance tests, Adhesion tests, Leak tests, Electrical testing, Electrical measurement, Test equipment, Circuits, Performance testing, Thermal testing, Accelerated testing, Detail specification, Quality control, Statistical quality control, Temperature measurement, Voltage measurement, Current measurement, Charge measurement, Capacitance measurement, Resistance measurement, Impedance measurement, Power measurement (electric), Noise (spurious signals), Sensitivity, Inductance measurement, Frequency measurement, Time measurement, Thermal-cycling tests, Endurance testing, Encapsulated, Diodes, Transistors, Oscillators, Semiconductor diodes, Suppressors, Pulse circuits, Variable capacitors, Power factor, Microwave devices, Detectors (circuits), Receivers, Attenuation, Radiofrequencies, Pulse generators, Avalanche diodes, Rectifier diodes, Thyristors, Transistors, Breakdown voltage, Microwaves, Power gain, Field-effect transistors
BS 9450:1975
Specification for integrated electronic circuits and micro-assemblies of assessed quality (capability approval procedures): generic data and methods of test
0 580 08634 8
Summary: Requirements for a system of capability approval of manufacturers which is analogous to a manufacturer receiving qualification approval for a series of stucturally similar components.
Keywords: Integrated circuits, Circuits, Electronic equipment and components, Quality assurance systems, Assessed quality, Capability approval, Approval testing, Inspection, Specification (approval), Marking, Colour codes, Ratings, Repair, Safety measures, Electrical testing, Electrical measurement, Environmental testing, Testing conditions, Thermal-cycling tests, Tracer methods, Leak tests, Solderability testing, Radioactive tracer methods, Mechanical testing, Fire tests, Damp-heat tests, Flammability, Test equipment, Thick-film devices, Solvent-resistance tests, Endurance testing, Electric conductors, Visual inspection (testing), Defects, Resistors, Adhesion tests, Peeling tests, Accelerated testing, Sampling methods, Handbooks, Technical documents, Statistical quality control, Quality control, Detail specification
BS 9450:1998
Specification for integrated electronic circuits and micro-assemblies of assessed quality (capability approval procedures). Generic data and methods of test
0 580 26847 0
Keywords: Integrated circuits, Circuits, Electronic equipment and components, Microassembling, Quality assurance systems, Assessed quality, Capability approval, Approval testing, Inspection, Specification (approval), Marking, Colour codes, Ratings, Repair, Safety measures, Electrical testing, Electrical measurement, Environmental testing, Vibration testing, Impact testing, Acceleration tests, Shear testing, Testing conditions, Thermal-cycling tests, Tracer methods, Leak tests, Solderability testing, Radioactive tracer methods, Mechanical testing, Fire tests, Damp-heat tests, Flammability, Test equipment, Thick-film devices, Solvent-resistance tests, Endurance testing, Electric conductors, Visual inspection (testing), Defects, Resistors, Adhesion tests, Peeling tests, Accelerated testing, Sampling methods, Capacitors, Transistors, Handbooks, Thin-film circuits, Thick-film circuits, Monolithic integrated circuits, Technical documents, Technical writing, Conformity, Layout, Data, Flow charts, Statistical quality control, Quality control, Detail specification
BS AU 152:1970
Specification for rear marking plates for vehicles
0 580 06160 4
Keywords: Road vehicles, Road vehicle components, Vehicle reflectors, Design, Marking, Yellow, Colour, Chromaticity, Fluorescent materials, Luminous intensity, Photometry (light measurement), Optical properties of materials, Accelerated testing, Weathering, Bend testing, Corrosion tests, Water-resistance tests, Thermal resistance, Thermal testing, Wear resistance, Wear tests, White, Adhesion tests, Mechanical testing, Symbols, Test equipment
BS CECC 00802:1994
Harmonized system of quality assessment for electronic components. Guidance document: CECC Standard method for the specification of surface mounting components (SMDs) of assessed quality
0 580 23470 3
Summary: Applies to all electronic components covered by the CECC System where these components are required to be assessed with respect to their application to surface mounting.
Keywords: Electronic equipment and components, Surfaces, Fixing, Assembling, Assessed quality, Quality assurance systems, Specification (approval), Approval testing, Inspection, Marking, Clearances, Soldering, Temperature, Cleaning, Classification systems, Testing conditions, Solderability testing, Test specimens, Accelerated testing, Shear testing, Bend testing
BS CECC 50000:1987
Harmonized system of quality assessment for electronic components. Generic specification: discrete semiconductor devices
0 580 16263 X
Summary: Applies to diodes, transistors, rectifier diodes and thyristors. Specifies quality assessment and test and measurement conditions. Appendices on structural similarity, inspection requirements, tests and screening.
Keywords: Semiconductor devices, Semiconductor diodes, Semiconductor rectifiers, Transistors, Thyristors, Electronic equipment and components, Quality assurance systems, Assessed quality, Qualification approval, Marking, Colour codes, Designations, Sampling methods, Testing conditions, Electrical testing, Environmental testing, Mechanical testing, Orientation, Leak tests, Endurance testing, Statistical quality control, Quality control, Electrical measurement, Breakdown voltage, Voltage measurement, Test equipment, Circuits, Performance testing, Transient voltages, Power measurement (electric), Noise (spurious signals), Current measurement, Capacitance measurement, Visual inspection (testing), Approval testing, Inspection, Specification (approval), Capability approval, Acceptance (approval), Thermal testing, Accelerated testing, Heat of activation
BS CECC 90000:1985
Harmonized system of quality assessment for electronic components. Generic specification: monolithic integrated circuits
0 580 14726 6
Summary: General details, quality assessment procedures, test and measurement procedures and details of screening requirements.
Keywords: Monolithic integrated circuits, Integrated circuits, Circuits, Electronic equipment and components, Quality assurance systems, Assessed quality, Qualification approval, Approval testing, Inspection, Specification (approval), Marking, Position, Testing conditions, Electrical testing, Environmental testing, Accelerated testing, Leak tests, Solderability testing, Mechanical testing, Test specimens, Formulae (mathematics), Capability approval, Orientation
BS CECC 90000:1991
Harmonized system of quality assessment for electronic components. Generic specification: monolithic integrated circuits
0 580 19476 0
Summary: Specifies the terms, definitions, symbols, test methods and other material for monolithic integrated circuits necessary to prepare appropriate detail specifications in the CECC system.
Keywords: Visual inspection (testing), Defects, Quality control, Surface defects, Monolithic integrated circuits, Integrated circuits, Circuits, Electronic equipment and components, Quality assurance systems, Assessed quality, Qualification approval, Approval testing, Inspection, Specification (approval), Marking, Position, Testing conditions, Electrical testing, Environmental testing, Accelerated testing, Leak tests, Solderability testing, Mechanical testing, Test specimens, Formulae (mathematics), Capability approval, Orientation
BS EN 1097-8:2000
Tests for mechanical and physical properties of aggregates. Determination of the polished stone value
0 580 35180 7
Keywords: Aggregates, Cement and concrete technology, Mechanical properties of materials, Physical properties of materials, Mineral aggregates, Roads, Mechanical testing, Wear tests, Friction tests, Polishing, Test specimens, Specimen preparation, Testing conditions, Test equipment, Calibration, Accelerated testing, Precision
BS EN 1123-1:1999
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. Requirements, testing, quality control
0 580 32083 9
Keywords: Pipes, Pipe fittings, Pipe couplings, Seamed pipes, Steels, Hot-dip galvanizing, Spigot-and-socket joints, Drainpipes, Sewers, Pressure pipes, Drainage, Waste-water drainage, Water, Quality control, Grades (quality), Form tolerances, Surface treatment, Hardness measurement, Elongation at fracture, Compression set, Low-temperature testing, Accelerated testing, Ageing tests, Stress relaxation, Chemical-resistance tests, Ozone, Physical testing, Physical properties of materials, Mechanical testing, Volume measurement, Leak tests, Thermal testing, Corrosion resistance, Defects, Dimensional measurement, Marking, Type testing, Testing conditions, Test specimens, Performance testing, Technical documents
BS EN 1123-3:2004
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
0 580 44956 4
Keywords: Pipes, Pipe fittings, Pipe couplings, Seamed pipes, Steels, Hot-dip galvanizing, Spigot-and-socket joints, Drainpipes, Sewers, Pressure pipes, Drainage, Waste-water drainage, Water, Quality control, Grades (quality), Form tolerances, Surface treatment, Hardness measurement, Elongation at fracture, Compression set, Low-temperature testing, Accelerated testing, Ageing tests, Stress relaxation, Chemical-resistance tests, Ozone, Physical testing, Physical properties of materials, Mechanical testing, Volume measurement, Leak tests, Thermal testing, Corrosion resistance, Defects, Dimensional measurement, Marking, Type testing, Testing conditions, Test specimens, Performance testing, Technical documents
BS EN 12280-2:2002
Rubber- or plastics-coated fabrics. Accelerated ageing tests. Physical ageing: effect of light or weathering
0 580 40314 9
Keywords: Coated fabrics, Rubber coatings, Natural rubber, Plastic coatings, Plastics, Ageing tests, Weathering, Environmental testing, Light, Accelerated testing
BS EN 12280-3:2002
Rubber- or plastics-coated fabrics. Accelerated ageing tests. Environmental ageing
0 580 40316 5
Keywords: Coated fabrics, Rubber coatings, Natural rubber, Plastic coatings, Plastics, Ageing tests, Environmental testing, Damp-heat tests, Textile testing, Fabric testing, Accelerated testing, Textile products, Cloth
BS EN 13266:2001
Slow-release fertilizers. Determination of the release of the nutrients. Method for coated fertilizers
0 580 40277 0
Keywords: Fertilizers, Agricultural chemicals, Agricultural chemicals technology, Accelerated testing, Soil improvement
BS EN 13286-49:2004
Unbound and hydraulically bound mixtures. Accelerated swelling test for soil treated by lime and/or hydraulic binder
0 580 43564 4
Keywords: Construction engineering works, Swelling, Accelerated testing, Mechanical testing, Soil testing, Stabilized soils, Soils, Hydraulic lime, Lime, Binding agents, Test specimens, Roads, Construction materials, Mixtures
BS EN 13523-10:2001
Coil coated metals. Test methods. Resistance to fluorescent UV light and water condensation
0 580 37251 0
Keywords: Coatings, Metals, Organic coatings, Coils, Environmental testing, Artificial weathering tests, Fluorescent lamps, Ultraviolet radiation, Condensation, Water, Accelerated testing
BS EN 13744:2004
Surfaces for sports areas. Procedure for accelerated ageing by immersion in hot water
0 580 44597 6
Keywords: Leisure equipment, Sports equipment, Floor coverings, Surfaces, Artificial sports surfaces, Polymers, Artificial ageing tests, Heat ageing tests, Accelerated testing, Water-resistance tests
BS EN 13817:2004
Surfaces for sports areas. Procedure for accelerated ageing by exposure to hot air
0 580 44598 4
Keywords: Artificial sports surfaces, Surfacing (exterior spaces), Floor coverings, Sports equipment, Leisure equipment, Heat ageing tests, Ageing tests, Accelerated testing, Chemical analysis and testing, Artificial weathering tests, Environmental testing, Laboratory testing, Comparative tests, Physical properties of materials, Polymers, Test specimens
BS EN 14112:2003
Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of oxidation stability (accelerated oxidation test)
0 580 41834 0
Keywords: Vegetable fats, Vegetable oils, Animal fats, Animal oils, Fatty acids, Esters (carboxylic), Oxidation resistance, Accelerated testing, Chemical analysis and testing
BS EN 14187-9:2006
Cold applied joint sealants. Test methods. Function testing of joint sealants
0 580 46947 6
Keywords: Concretes, Sealing materials, Joints, Cold-working, Road surfacing, Pavements (roads), Roads, Cold tests, Environmental testing, Accelerated testing
BS EN 14691:2005
Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Compatibility by heat conditioning
0 580 46613 2
Keywords: Waterproof materials, Flexible materials, Waterproofing materials, Concretes, Bridge decks, Bridges, Roads, Road surfacing, Asphalts, Bitumens, Compatibility, Thermal testing, Heat ageing tests, Shear testing, Accelerated testing
BS EN 15323:2007
Bitumen and bituminous binders. Accelerated long-term ageing/conditioning by the rotating cylinder method (RCAT)
978 0 580 53011 1
Keywords: Bitumens, Bituminous products, Binding agents, Mastic asphalts, Mastics, Roads, Petroleum products, Ageing tests, Accelerated testing, Artificial ageing tests, Testing conditions, Test equipment, Rotational motion
BS EN 190000:1996
Harmonized system of quality assessment for electronic components. Generic specification: monolithic integrated circuits
0 580 25211 6
Summary: Annexes cover capability approval, structural similarity, SPC and EQML.
Keywords: Monolithic integrated circuits, Integrated circuits, Circuits, Electronic equipment and components, Visual inspection (testing), Defects, Quality control, Surface defects, Quality assurance systems, Assessed quality, Qualification approval, Approval testing, Inspection, Specification (approval), Thermal testing, Marking, Electrical testing, Environmental testing, Damp-heat tests, Impact testing, Accelerated testing, Vibration testing, Thermal testing, Acceleration tests, Leak tests, Solderability testing, Mechanical testing, Test specimens, Formulae (mathematics), Capability approval, Orientation, Testing conditions, Definitions, Symbols, Detail specification, Endurance testing, Dimensions
BS EN 3475-401:2002
Aerospace series. Cables, electrical, aircraft use. Test methods. Accelerated ageing
0 580 38367 9
Keywords: Air transport engineering, Aircraft components, Electric cables, Electrical testing, Accelerated testing, Ageing tests, Artificial ageing tests
BS EN 3745-401:2005
Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Accelerated ageing
0 580 48644 3
Keywords: Aircraft components, Fibre optics, Fibre optic cables, Optical fibres, Electric cables, Ageing tests, Accelerated testing
BS EN 50497:2007
Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables
978 0 580 57097 1
Keywords: Cable sheaths, Electrical insulating materials, Solid electrical insulating materials, Polyvinyl chloride, Sheathed cables, Insulated cables, Plasticizers, Exudation, Accelerated testing
BS EN 60068-2-42:2003
Environmental testing. Test methods. Test Kc. Sulphur dioxide test for contacts and connections
0 580 42669 6
Keywords: Environmental testing, Electrical components, Electrical equipment, Electronic equipment and components, Electric contacts, Electric connectors, Sulfur dioxide, Corrosion tests, Accelerated corrosion tests, Accelerated testing, Contact resistance, Test atmospheres, Testing conditions
BS EN 60068-2-43:2003
Environmental testing. Test methods. Test Kd. Hydrogen sulphide test for contacts and connections
0 580 42668 8
Keywords: Environmental testing, Electrical components, Electrical equipment, Electronic equipment and components, Electric contacts, Electric connectors, Hydrogen sulfide, Silver, Silver alloys, Tarnish, Corrosion tests, Accelerated corrosion tests, Accelerated testing, Contact resistance, Test atmospheres, Testing conditions
BS EN 60068-2-48:2000
Environmental testing. Test methods. Guidance on the application of the tests of IEC 60068 to simulate the effects of storage
0 580 34052 X