British Standards Institute: Accelerated corrosion tests

BS 2000-220:1998

Methods of test for petroleum and its products. Petroleum products and lubricants. Determination of rust-prevention characteristics of lubricating greases

0 580 34275 1

Summary: Identical with IP 220/98.

Keywords: Petroleum products, Petroleum, Chemical analysis and testing, Lubricants, Grease, Corrosion tests, Accelerated corrosion tests, Rust protection, Corrosion inhibitors, Corrosion resistance, Test equipment, Reproducibility

BS 2011-2.2Kd:1984

Environmental testing. Guidance. Test Kd. Guidance on Test Kd: Hydrogen sulphide test for contacts and connections

0 580 13722 8

Summary: Describes the mechanism of corrosion of contacts, particularly with respect to the concentration of hydrogen sulphide and the effects of humidity and temperature to which they may be exposed. The significance of the parameters in Test Kd is covered.

Keywords: Environmental testing, Electric contacts, Electric connectors, Electrical equipment, Electrical components, Tarnish, Silver, Silver alloys, Corrosion tests, Gas-resistance tests, Hydrogen sulphide, Contact resistance, Accelerated corrosion tests, Accelerated testing

IEC 60068-2-46:1982

Environmental testing. Guidance. Test Kd. Guidance on Test Kd: Hydrogen sulphide test for contacts and connections

0 580 13722 8

Summary: Describes the mechanism of corrosion of contacts, particularly with respect to the concentration of hydrogen sulphide and the effects of humidity and temperature to which they may be exposed. The significance of the parameters in Test Kd is covered.

Keywords: Environmental testing, Electric contacts, Electric connectors, Electrical equipment, Electrical components, Tarnish, Silver, Silver alloys, Corrosion tests, Gas-resistance tests, Hydrogen sulphide, Contact resistance, Accelerated corrosion tests, Accelerated testing

BS 2769-1:1984

Hand-held electric motor-operated tools. Specification for general requirements

0 580 13779 1

Summary: General requirements and conditions of test applicable to these tools. Requirements specific to particular tools are additionally specified in a related Part.

Keywords: Electrically-operated devices, Hand tools, Portable, Magnetic devices, Type testing, Rated voltage, Protected electrical equipment, Classification systems, Marking, Electrical safety, Electrical testing, Starting, Thermal testing, Temperature rise, Leakage currents, Watertightness tests, Damp-air tests, Environmental testing, Electrical insulation, Dielectric-strength tests, Endurance testing, Impact testing, Mechanical testing, Flexible conductors, Bend testing, Pull-out tests, Electric terminals, Earthing, Electric connectors, Leakage paths, Clearance distances, Pressure testing, Corrosion tests, Test equipment, Circuits, Test fingers, Accelerated corrosion tests

BS 3745:1970

Method for the evaluation of results of accelerated corrosion tests on metallic coatings

0 580 06024 1

Summary: Gives a rating system which provides a means of defining acceptable levels of performance in accelerated corrosion tests where required by other relevant British standards.

Keywords: Metal coatings, Coatings, Corrosion tests, Accelerated corrosion tests, Samples, Area, Protective coatings

BS 4601:1970

Specification for electroplated coatings of nickel plus chromium on plastics materials

0 580 06130 2

Summary: Specifies appearance, type and thickness of nickel, type and thickness of chromium, thermal cycling and corrosion resistance tests for various service conditions.

Keywords: Metal coatings, Electroplating, Nickel, Chromium, Coatings, Plastics, Designations, Thickness measurement, Ductility testing, Visual inspection (testing), Thermal-cycling tests, Accelerated corrosion tests, Salt-spray tests, Corrosion tests, Flaw detection, Protective coatings

BS 6356-1:1997

Spraying equipment for crop protection. Method of test for sprayer nozzles

0 580 27521 3

Keywords: Crop protection, Agronomy, Agriculture, Agricultural equipment, Spraying equipment (agriculture), Sprayer nozzles, Sprayers, Hydraulic equipment, Test equipment, Flow rates, Performance testing, Pressure testing, Testing conditions, Angles (geometry), Accelerated corrosion tests, Wear tests

ISO 5682-1:1996

Spraying equipment for crop protection. Method of test for sprayer nozzles

0 580 27521 3

Keywords: Crop protection, Agronomy, Agriculture, Agricultural equipment, Spraying equipment (agriculture), Sprayer nozzles, Sprayers, Hydraulic equipment, Test equipment, Flow rates, Performance testing, Pressure testing, Testing conditions, Angles (geometry), Accelerated corrosion tests, Wear tests

BS EN 10229:1998

Evaluation of resistance of steel products to hydrogen induced cracking (HIC)

0 580 29798 5

Keywords: Steels, Cracking, Corrosion tests, Accelerated corrosion tests, Hydrogen, Splitting tests, Test specimens, Specimen preparation, Test equipment, Visual inspection (testing), Mathematical calculations

BS EN 12472:2005

Method for the simulation of wear and corrosion for the detection of nickel release from coated items

0 580 47730 4

Keywords: Jewellery, Coated materials, Nickel, Metal coatings, Coatings, Wear tests, Corrosion tests, Chemical analysis and testing, Chemical hazards, Allergies, Skin (body), Accelerated corrosion tests

BS EN 60068-2-11:1999

Environmental testing. Test methods. Tests. Test KA. Salt mist

0 580 32944 5

Keywords: Environmental testing, Electrical components, Electrical equipment, Electronic equipment and components, Salt-spray tests, Mist, Accelerated corrosion tests, Corrosion tests, Corrosion resistance, Test equipment, Test specimens, Testing conditions, Temperature, Visual inspection (testing)

IEC 60068-2-11:1981

Environmental testing. Test methods. Tests. Test KA. Salt mist

0 580 32944 5

Keywords: Environmental testing, Electrical components, Electrical equipment, Electronic equipment and components, Salt-spray tests, Mist, Accelerated corrosion tests, Corrosion tests, Corrosion resistance, Test equipment, Test specimens, Testing conditions, Temperature, Visual inspection (testing)

BS EN 60068-2-42:2003

Environmental testing. Test methods. Test Kc. Sulphur dioxide test for contacts and connections

0 580 42669 6

Keywords: Environmental testing, Electrical components, Electrical equipment, Electronic equipment and components, Electric contacts, Electric connectors, Sulfur dioxide, Corrosion tests, Accelerated corrosion tests, Accelerated testing, Contact resistance, Test atmospheres, Testing conditions

BS EN 60068-2-43:2003

Environmental testing. Test methods. Test Kd. Hydrogen sulphide test for contacts and connections

0 580 42668 8

Keywords: Environmental testing, Electrical components, Electrical equipment, Electronic equipment and components, Electric contacts, Electric connectors, Hydrogen sulfide, Silver, Silver alloys, Tarnish, Corrosion tests, Accelerated corrosion tests, Accelerated testing, Contact resistance, Test atmospheres, Testing conditions

BS EN 60068-2-52:1996

Environmental testing. Test methods. Tests. Test Kb. Salt mist cyclic (sodium chloride solution)

0 580 26156 5

Summary: Specifies a test for components or equipment designed to withstand a salt-laden atmosphere.

Keywords: Environmental testing, Electrical components, Electrical equipment, Electronic equipment and components, Corrosion tests, Salt-spray tests, Mist, Accelerated corrosion tests, Artificial weathering tests, Damp-heat tests, Test equipment, Testing conditions, Test duration, Classification systems

IEC 60068-2-52:1996

Environmental testing. Test methods. Tests. Test Kb. Salt mist cyclic (sodium chloride solution)

0 580 26156 5

Summary: Specifies a test for components or equipment designed to withstand a salt-laden atmosphere.

Keywords: Environmental testing, Electrical components, Electrical equipment, Electronic equipment and components, Corrosion tests, Salt-spray tests, Mist, Accelerated corrosion tests, Artificial weathering tests, Damp-heat tests, Test equipment, Testing conditions, Test duration, Classification systems

BS EN 60068-2-60:1996

Environmental testing. Test methods. Test Ke. Flowing mixed gas corrosion test

0 580 25660 X

Summary: Determines the corrosive influence of operating and storage indoor environments on electrotechnical components and materials.

Keywords: Environmental testing, Electrical components, Electrical equipment, Electronic equipment and components, Accelerated corrosion tests, Corrosion tests, Test equipment, Testing conditions, Test atmospheres, Specimen preparation, Electric contacts, Electric connectors

IEC 60068-2-60:1995

Environmental testing. Test methods. Test Ke. Flowing mixed gas corrosion test

0 580 25660 X

Summary: Determines the corrosive influence of operating and storage indoor environments on electrotechnical components and materials.

Keywords: Environmental testing, Electrical components, Electrical equipment, Electronic equipment and components, Accelerated corrosion tests, Corrosion tests, Test equipment, Testing conditions, Test atmospheres, Specimen preparation, Electric contacts, Electric connectors

BS EN 60749-13:2002

Semiconductor devices. Mechanical and climatic test methods. Salt atmosphere

0 580 40293 2

Keywords: Semiconductor devices, Integrated circuits, Electronic equipment and components, Mechanical testing, Environmental testing, Climate, Corrosion resistance, Accelerated corrosion tests, Accelerated testing, Salt-spray tests, Salts, Destructive testing

BS EN 60749-24:2004

Semiconductor devices. Mechanical and climatic test methods. Accelerated moisture resistance. Unbiased HAST

0 580 43972 0

Keywords: Semiconductor devices, Integrated circuits, Electronic equipment and components, Mechanical testing, Environmental testing, Climate, Solid-state physics, Moisture measurement, Damp-heat tests, Corrosion resistance, Accelerated corrosion tests, Accelerated testing, Destructive testing, Testing conditions, Humidity, Temperature, Performance testing, Reliability

BS EN 60749-33:2004

Semiconductor devices. Mechanical and climatic test methods. Accelerated moisture resistance. Unbiased autoclave

0 580 43973 9

Keywords: Semiconductor devices, Integrated circuits, Electronic equipment and components, Mechanical testing, Environmental testing, Climate, Solid-state physics, Moisture measurement, Damp-heat tests, Corrosion resistance, Accelerated corrosion tests, Accelerated testing, Destructive testing, Testing conditions, Pressure, Humidity, Temperature

BS EN ISO 10289:2001

Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates. Rating of test specimens and manufactured articles subjected to corrosion tests

0 580 37234 0

Keywords: Corrosion tests, Physico-chemical methods, Corrosion resistance, Metal coatings, Protective coatings, Non-metallic coatings, Coated materials, Metals, Ratings, Test specimens, Test equipment, Decorative coatings, Panels, Corrosion environments, Environmental testing, Accelerated corrosion tests, Accelerated testing

BS EN ISO 10993-15:2001

Biological evaluation of medical devices. Identification and quantification of degradation products from metals and alloys

0 580 37875 6

Keywords: Medical equipment, Biological analysis and testing, Medical instruments, Metals, Alloys, Deterioration, Degradation, Accelerated corrosion tests, Chemical analysis and testing, Chemical reactions, Physico-chemical methods

BS EN ISO 11130:1999

Corrosion of metals and alloys. Alternate immersion test in salt solution

0 580 32932 1

Keywords: Metals, Alloys, Metal coatings, Coatings, Immersion tests (corrosion), Corrosion tests, Corrosion, Corrosion resistance, Solutions, Salts, Test equipment, Testing conditions, Test specimens, Calibration, Cleaning, Specimen preparation, Accelerated corrosion tests, Impurities

BS EN ISO 16151:2008

Corrosion of metals and alloys. Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions

978 0 580 60539 0

Keywords: Corrosion tests, Metals, Salt-spray tests, Accelerated corrosion tests, Environmental testing, Chemical-resistance tests, Coatings, Corrosion resistance, Artificial weathering tests

BS EN ISO 16701:2008

Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution

978 0 580 60540 6

Keywords: Corrosion resistance, Alloys, Metals, Accelerated corrosion tests, Accelerated testing, Salt-spray tests, Humidity, Corrosion tests, Laboratory testing, Environmental testing, Comparative tests, Chlorides, Testing conditions, Test equipment

BS EN ISO 196:1995

Wrought copper and copper alloys. Detection of residual stress. Mercury(I) nitrate test

0 580 24478 4

Keywords: Copper, Copper alloys, Non-ferrous alloys, Non-ferrous metals, Residual stresses, Mercury inorganic compounds, Nitrates, Chemical analysis and testing, Test specimens, Accelerated corrosion tests, Stress corrosion

BS EN ISO 4536:1995

Metallic and non-organic coatings on metallic substrates. Saline droplets corrosion test (SD test)

0 580 15579 X

Summary: Method in which a discrete pattern of droplets is produced on the surface to be tested. Applicable to articles of complex shape, it offers particular advantages for testing some types of conversion coatings.

Keywords: Metal coatings, Coatings, Conversion coating, Metals, Accelerated corrosion tests, Salt-spray tests, Corrosion tests, Test equipment, Specimen preparation, Testing conditions

BS EN ISO 6988:1995

Metallic and other non-organic coatings. Sulfur dioxide test with general condensation of moisture

0 580 14915 3

Summary: Method for assessing the resistance of materials or products to condensed moisture containing sulphur dioxide. Suitable for testing metallic and other non-organic coatings.

Keywords: Metal coatings, Coatings, Metals, Corrosion tests, Sulfur dioxide, Damp-air tests, Environmental testing, Test equipment, Dimensions, Shape, Specimen preparation, Testing conditions, Accelerated corrosion tests, Damp-heat tests

BS EN ISO 7384:1995

Corrosion tests in artificial atmospheres. General requirements

0 580 24040 1

Summary: Specifies general requirements for the specimens, apparatus and procedure of corrosion tests in artificial atmospheres

Keywords: Corrosion tests, Metals, Alloys, Physico-chemical methods, Accelerated corrosion tests, Environmental testing, Atmospheric corrosion, Test atmospheres, Accelerated testing, Testing conditions, Test specimens, Test equipment, Reports, Corrosion, Specimen preparation

BS EN ISO 9227:2006

Corrosion tests in artificial atmospheres. Salt spray tests

0 580 48764 4

Keywords: Salt-spray tests, Accelerated corrosion tests, Corrosion tests, Artificial weathering tests, Environmental testing, Metals, Alloys, Metal coatings, Protective coatings, Coatings, Decorative coatings, Organic coatings, Conversion coating, Electrochemical coating, Chemical-resistance tests, Acetic acid, Test equipment

BS ISO 21207:2004

Corrosion tests in artificial atmospheres. Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying

978 0 580 61117 9

Keywords: Metals, Corrosion tests, Salt-spray tests, Gases, Atmospheric corrosion, Chemical-resistance tests, Dry-heat tests, Environmental testing, Accelerated corrosion tests, Corrosion resistance, Electronic equipment and components, Road vehicle components, Test equipment

BS 1224:1970

Specification for electroplated coatings of nickel and chromium

Not Current

0 580 05964 2

Summary: Nickel (with copper undercoat if required), with or without chromium topcoat, electrodeposited on steel (or iron), zinc alloy, copper or copper alloys, aluminium or alloys. Appearance, type, thickness of nickel and chromium, adhesion, corrosion resistance.

Keywords: Metal coatings, Electroplating, Nickel, Chromium, Coatings, Classification systems, Grades (quality), Designations, Ductility testing, Thickness measurement, Visual inspection (testing), Adhesion tests, Accelerated corrosion tests, Corrosion tests, Corrodkote test, Salt-spray tests, Steels, Heat treatment, Protective coatings

BS 2011:Part 2.1Kb:1987

Environmental testing. Tests. Test Kb. Salt mist, cyclic (sodium chloride solution)

Not Current

0 580 16100 5

Summary: Procedures are separated into a specified number of periods of spraying by a salt mist, each followed by storage under humid conditions.

Keywords: Environmental testing, Corrosion tests, Salt-spray tests, Mist, Accelerated corrosion tests, Artificial weathering tests, Damp-heat tests, Test equipment, Testing conditions, Electrical equipment, Electrical components, Test duration

BS 2011:Part 4:Section 4.4:1993

Environmental testing. Miscellaneous. Information for specification writers. Test summaries

Not Current

0 580 22596 8

Summary: Provides information in a summarized form on the individual environmental tests in IEC Publication 68-2.

Keywords: Electronic equipment and components, Electrical equipment, Electrical components, Environmental testing, Heating tests, Dry-heat tests, Cold-weather tests, Thermal testing, Cold tests, Testing conditions, Damp-heat tests, Storage, Thermal-cycling tests, Impact testing, Transportation, Acceleration tests, Dynamic testing, Bump tests, Drop tests, Materials handling, Vibration testing, Mechanical testing, Endurance testing, Air transport, Salt-spray tests, Corrosion tests, Electric contacts, Electric connectors, Accelerated corrosion tests, Leak tests, Seals, Watertightness tests, Solar radiation, Artificial weathering tests, Solderability testing, Printed-circuit boards, Electric terminals, Chemical-resistance tests, Solvent-resistance tests, Accelerated testing, Low-pressure tests, Fungal-resistance tests, Bend testing, Torsion testing, Tensile testing

BS 2011-2.1Ka:1982

Environmental testing. Tests. Test Ka.Salt mist

Not Current

0 580 12821 0

Summary: Determines the quality and uniformity of protective coatings, but is suitable neither as a general salt corrosion test nor for the evaluation of specimens intended for use in salt-laden atmospheres.

Keywords: Environmental testing, Salt-spray tests, Mist, Accelerated corrosion tests, Corrosion tests, Testing conditions, Electrical components, Electrical equipment, Artificial weathering tests, Specimen preparation

BS 2011-2.1Kc:1991

Environmental testing. Tests. Test Kc and guidance. Sulphur dioxide test for contacts and connections

Not Current

0 580 19314 4

Summary: Accelerated means to assess corrosive effects on contacts and connections of atmospheres polluted with sulphur combustion products. Gives information on a comparative basis but not as a general corrosion test applicable in industrial atmospheres.

Keywords: Environmental testing, Sulfur dioxide, Corrosion tests, Accelerated corrosion tests, Accelerated testing, Testing conditions, Test atmospheres, Test equipment, Electric contacts, Electric connectors, Electrical equipment, Electrical components, Contact resistance

BS 2011-2.1Kd:1977

Environmental testing. Tests. Test Kd. Hydrogen sulphide test for contacts and connections

Not Current

0 580 09634 3

Summary: Provides accelerated means to assess the effects of the tarnishing of silver and silver alloys used for contacts and connections. Particularly suitable for giving information on a comparative basis but not as a general corrosion test applicable in industrial atmospheres.

Keywords: Environmental testing, Hydrogen sulfide, Corrosion tests, Accelerated corrosion tests, Accelerated testing, Testing conditions, Test atmospheres, Test equipment, Electric contacts, Electric connectors, Silver, Silver alloys, Tarnish, Electrical equipment, Electrical components

BS 3900:Part F12:1985

Methods of test for paint. Durability tests on paint films. Determination of resistance to neutral salt spray

Not Current

0 580 14297 3

Summary: Describes procedure for evaluating corrosion resistance of paint films. See also BS 3900:Part F4.

Keywords: Paints, Coatings, Varnishes, Environmental testing, Salt-spray tests, Corrosion tests, Accelerated corrosion tests, Artificial weathering tests, Chemical-resistance tests, Testing conditions, Test equipment, Dimensions, Test specimens, Panels, Specimen preparation, Accelerated testing, Visual inspection (testing)

BS 4959:1974

Recommendations for corrosion and scale prevention in engine cooling water systems

Not Current

0 580 07695 4

Summary: A guide to protective maintenance of engine cooling water systems in use, when idle and when drained. Describes the additives used to prevent corrosion and scale formation, with chemical tests for control of their concentration. Also describes methods of cleaning cooling systems.

Keywords: Cooling systems, Engine components, Water, Corrosion protection, Corrosion products, Corrosion inhibitors, Cleaning, Maintenance, Performance testing, Accelerated corrosion tests, Additives, Chemical reactions, Chemical analysis and testing, Water-cooled systems, Scale (corrosion), Coolants

BS 5466:Part 3:1977

Methods for corrosion testing of metallic coatings. Copper-accelerated acetic acid salt spray test (CASS test)

Not Current

0 580 09853 2

Summary: Apparatus, test solution and procedure. Devised for copper + nickel + chromium or nickel + chromium coatings, but also suitable for anodic oxide coatings on aluminium. Not reliable for comparison of different types. Does not specify but gives guidance on type of test specimen, exposure period and interpretation of results. Annex gives calibration of test conditions.

Keywords: Accelerated corrosion tests, Salt-spray tests, Acetic acid, Copper, Metal coatings, Coatings, Metals, Corrosion tests, Test equipment, Solutions, Testing conditions, Calibration, Decorative coatings, Electroplating, Copper, Nickel, Chromium, Anodizing, Aluminium

BS 5977-2:1983

Lintels. Specification for prefabricated lintels

Not Current

0 580 13135 1

Summary: Requirements for concrete, steel and timber prefabricated lintels, including prefabricated elements used in composite lintels. Maximum span 4.5 m (single storey buildings) or 3.6 m (two or three storey buildings). Covers materials, protection against corrosion, design, workmanship, and includes an appendix giving recommendations for site installation.

Keywords: Lintels, Beams, Structural members, Prefabricated parts, Concretes, Structural steels, Steels, Structural timber, Wood, Composite materials, Protective coatings, Design, Structural design, Loading, Bend testing, Deflection tests, Shear testing, Impact testing, Abrasion, Wear tests, Accelerated corrosion tests, Corrosion tests, Installation, Mechanical testing, Organic coatings, Galvanizing, Metal coatings, Zinc

BS 6917:1987

Method for corrosion testing in artificial atmospheres: general principles

Not Current

0 580 16287 7

Summary: Requirements for specimens, apparatus and procedure. Applies to metals and alloys with and without permanent corrosion protection or temporary corrosion protection.

Keywords: Corrosion tests, Testing, Physico-chemical methods, Accelerated corrosion tests, Environmental testing, Atmosphere, Atmospheric corrosion, Test atmospheres, Accelerated testing, Testing conditions, Test specimens, Test equipment, Reports, Corrosion, Specimen preparation

BS 7479:1991

Method for salt spray corrosion tests in artificial atmospheres

Not Current

0 580 19998 3

Summary: Apparatus, reagents and procedure to be used in conducting neutral salt spray (NSS), acetic acid salt spray (AASS) and copper accelerated acetic acid salt spray (CASS) tests for the assessment of the corrosion resistance of metallic materials with or without permanent corrosion protection or temporary corrosion protection.

Keywords: Salt-spray tests, Accelerated corrosion tests, Corrosion tests, Acetic acid, Testing conditions, Test equipment, Metals, Specimen preparation, Alloys, Test specimens

BS EN ISO 1462:1995

Metallic coatings. Coatings other than those anodic to the basis metal. Accelerated corrosion tests. Method for the evaluation of results

Not Current

0 580 24248 X

Keywords: Metal coatings, Coatings, Corrosion tests, Accelerated corrosion tests, Test specimens, Electrodeposition, Visual inspection (testing)

BS EN ISO 7253:2001

Paints and varnishes. Determination of resistance to neutral salt spray (fog)

Not Current

0 580 27234 6

Keywords: Paints, Coatings, Varnishes, Salt-spray tests, Corrosion tests, Accelerated corrosion tests, Artificial weathering tests, Environmental testing, Chemical-resistance tests, Test equipment, Specimen preparation, Testing conditions, Thickness, Accelerated testing, Visual inspection (testing)

PD 6521:1988

Summaries of test methods for environmental testing of electrotechnical products

Not Current

0 580 16765 8

Summary: Information in summarised form on the individual environmental tests in IEC Publication 68-2.

Keywords: Electronic equipment and components, Electrical equipment, Electrical components, Environmental testing, Heating tests, Dry-heat tests, Cold-weather tests, Thermal testing, Cold tests, Testing conditions, Damp-heat tests, Storage, Thermal-cycling tests, Impact testing, Transportation, Acceleration tests, Dynamic testing, Bump tests, Drop tests, Materials handling, Vibration testing, Mechanical testing, Endurance testing, Air transport, Salt-spray tests, Corrosion tests, Electric contacts, Electric connectors, Accelerated corrosion tests, Leak tests, Seals, Watertightness tests, Solar radiation, Artificial weathering tests, Solderability testing, Printed-circuit boards, Electric terminals, Chemical-resistance tests, Solvent-resistance tests, Accelerated testing, Low-pressure tests, Fungal-resistance tests, Bend testing, Torsion testing, Tensile testing

Keyword: Accelerated corrosion testsBritish Standards Institute, BSI

Keyword: Accelerated corrosion tests
British Standards Institute, BSI