Keyword: Abrasives
British Standards Institute, BSI



Go to All Keywords 		BSI Standards
picture picture picture picture picture picture
BS 1902-4.6:1985
Methods of testing refractory materials. Properties measured under an applied stress. Determination of resistance to abrasion at ambient temperature (abradability index at ambient temperature) (method 1902-406)
0 580 14305 8
Summary: Test method for measuring abrasion of refractory materials at ambient temperatures. The test material is subjected to the action of abrasive grit, and the volume loss compared with that of a standard material.
Keywords: Refractories, Refractory materials, Wear resistance, Mechanical testing, Test equipment, Calibration, Error correction, Shaped refractories, Abrasives, Wear tests
BS 4481-2:1983
Bonded abrasive products. Specification for dimensions of grinding wheels and segments
0 580 13378 8
Summary: Gives dimensions of wheels and segments classified, in accordance with Part 1, by their intended use.
Keywords: Abrasives, Grinding wheels, Cutting tools, Dimensions, Shape, Grinding, Abrasive processes, Oilstones, Hand tools, Hand finishing sticks, SI system (metric), Designations
BS 4761:1971
Specification for sprayed unfused metal coatings for engineering purposes
0 580 06574 X
Summary: Requirements for sprayed, unfused coatings of metals and metallic compounds applied by combustion gas flame, plasma arc, detonation and similar processes; preparation of components, spraying technique, sealing, finishing and inspection.
Keywords: Metal coatings, Coatings, Metals, Metal spraying, Spraying (coating), Surface treatment, Abrasives, Reconditioning, Finishes
BS 4950:1973
Specification for sprayed and fused metal coatings for engineering purposes
0 580 07854 X
Summary: Requirements for sprayed and fused coatings of metal and metallic compounds applied by combustion gas flame and arc processes; preparation of components, conditions for spraying and subsequent fusion, finishing and inspection.
Keywords: Metal coatings, Coatings, Metals, Metal spraying, Spraying (coating), Heating, Surface treatment, Abrasives, Reconditioning, Finishes
BS 7007-3:1988
Abrasive products. Specification for dimensional tolerances on non-standard coated abrasive products
0 580 16789 5
Summary: Tolerances on discs, belts and other cross-sections.
Keywords: Abrasives, Coated materials, Coated fabrics, Dimensional tolerances, Diameter, Width, Length, Abrasive paper
ISO 8366:1987
Abrasive products. Specification for dimensional tolerances on non-standard coated abrasive products
0 580 16789 5
Summary: Tolerances on discs, belts and other cross-sections.
Keywords: Abrasives, Coated materials, Coated fabrics, Dimensional tolerances, Diameter, Width, Length, Abrasive paper
BS 7007-3:1988
Abrasive products. Specification for dimensional tolerances on non-standard coated abrasive products
0 580 16789 5
Summary: Tolerances on discs, belts and other cross-sections.
Keywords: Abrasives, Coated materials, Coated fabrics, Dimensional tolerances, Diameter, Width, Length, Abrasive paper
ISO 8366:1987
Abrasive products. Specification for dimensional tolerances on non-standard coated abrasive products
0 580 16789 5
Summary: Tolerances on discs, belts and other cross-sections.
Keywords: Abrasives, Coated materials, Coated fabrics, Dimensional tolerances, Diameter, Width, Length, Abrasive paper
BS 7007-5:1994
Abrasive products. Specification for dimensions, tolerances and designation of abrasive belts
0 580 22868 1
Keywords: Abrasives, Dimensions, Dimensional tolerances, Length, Width, Abrasive belts
ISO 1929:1993
Abrasive products. Specification for dimensions, tolerances and designation of abrasive belts
0 580 22868 1
Keywords: Abrasives, Dimensions, Dimensional tolerances, Length, Width, Abrasive belts
BS 7007-5:1994
Abrasive products. Specification for dimensions, tolerances and designation of abrasive belts
0 580 22868 1
Keywords: Abrasives, Dimensions, Dimensional tolerances, Length, Width, Abrasive belts
ISO 1929:1993
Abrasive products. Specification for dimensions, tolerances and designation of abrasive belts
0 580 22868 1
Keywords: Abrasives, Dimensions, Dimensional tolerances, Length, Width, Abrasive belts
BS 7007-6:1994
Abrasive products. Specification for dimensions, tolerances and designation of abrasive sheets
0 580 23042 2
Keywords: Abrasives, Sheet materials, Dimensions, Dimensional tolerances, Designations
ISO 2235:1993
Abrasive products. Specification for dimensions, tolerances and designation of abrasive sheets
0 580 23042 2
Keywords: Abrasives, Sheet materials, Dimensions, Dimensional tolerances, Designations
BS 7007-6:1994
Abrasive products. Specification for dimensions, tolerances and designation of abrasive sheets
0 580 23042 2
Keywords: Abrasives, Sheet materials, Dimensions, Dimensional tolerances, Designations
ISO 2235:1993
Abrasive products. Specification for dimensions, tolerances and designation of abrasive sheets
0 580 23042 2
Keywords: Abrasives, Sheet materials, Dimensions, Dimensional tolerances, Designations
BS 7425-2:1991
Abrasive grains. Method for determining the capillarity
0 580 19677 1
Keywords: Abrasives, Abrasive powders, Particulate materials, Capillarity, Test equipment, Testing conditions, Water, Height, Dimensional measurement
BS 7425-3:1993
Abrasive grains. Method for sampling and splitting
0 580 22205 5
Keywords: Abrasive powders, Abrasives, Particulate materials, Sampling methods, Sampling equipment, Dimensions
BS 7425-4:1993
Abrasive grains. Specification for test-sieving machines
0 580 22493 7
Summary: Technical requirements for machines used for determining the size of bonded and coated abrasive micrograins.
Keywords: Abrasives, Abrasive powders, Particulate materials, Sieving equipment, Sieving, Screening (sizing), Size classification, Test equipment, Screening equipment, Installation, Dimensions
BS EN 12413:2007
Safety requirements for bonded abrasive products
978 0 580 56114 6
Keywords: Grinding wheels, Parting tools, Abrasives, Grinding, Cutting tools, Aluminium oxide, Silicon inorganic compounds, Carbides, Zirconium-containing alloys, Hazards, Safety measures, Equipment safety, Occupational safety, Classification systems, Hardness, Velocity, Dimensions, Shape, Marking, Colour codes, Symbols, Labels, Visual inspection (testing), Inspection, Performance testing, Mechanical testing, Instructions for use, Seatings, Spindles, Centre of gravity, Load capacity
BS EN 13236:2001
Safety requirements for superabrasives
0 580 37681 8
Keywords: Abrasives, Health and safety requirements, Safety measures, Equipment safety, Hazards, Grinding machines, Grinding wheels, Parting tools, Wires, Diamond tools, Boron-nitride wheels, Boron inorganic compounds, Nitrides, Diamond, Specification (approval), Approval testing, Verification, Instructions for use
BS EN 13743:2002
Safety requirements for coated abrasives
0 580 38876 X
Keywords: Safety measures, Coated materials, Coatings, Abrasives, Hazards, Wheels
BS EN 2497:1990
Specification for dry abrasive blasting of titanium and titanium alloys
0 580 18679 2
Summary: Process schedule and requirements for titanium used in aerospace constructions. Applicable to the pre-treatment of titanium and titanium alloys and to qualification tests of adhesives on these materials.
Keywords: Titanium, Titanium alloys, Air transport engineering, Space technology, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasive processes, Abrasives, Inspection, Sandblasting
BS EN ISO 11124-1:1997
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. General introduction and classification
0 580 22894 0
Keywords: Steels, Surface treatment, Painting, Abrasives, Cast-iron, Metals, Blast-cleaning, Mechanical cleaning, Shot blasting, Classification systems, Shape, Grit, Particle size distribution, Designations, Marking, Cleaning
BS EN ISO 11124-2:1997
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Chilled-iron grit
0 580 22895 9
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Grit, Cast-iron, Chill casting, Designations, Codes, Hardness, Density, Shape, Defects, Crystal microstructure, Chemical composition, Moisture, Marking, Grades (quality), Particle size distribution
BS 7079-E2:1994
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Chilled-iron grit
0 580 22895 9
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Grit, Cast-iron, Chill casting, Designations, Codes, Hardness, Density, Shape, Defects, Crystal microstructure, Chemical composition, Moisture, Marking, Grades (quality), Particle size distribution
BS EN ISO 11124-3:1997
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. High-carbon cast-steel shot and grit
0 580 22897 5
Keywords: Steels, Surface treatment, Shot blasting, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Grit, High-carbon steels, Cast steels, Designations, Hardness, Density, Shape, Defects, Crystal microstructure, Chemical composition, Moisture, Marking, Grades (quality), Particle size distribution, Codes
BS 7079-E3:1994
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. High-carbon cast-steel shot and grit
0 580 22897 5
Keywords: Steels, Surface treatment, Shot blasting, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Grit, High-carbon steels, Cast steels, Designations, Hardness, Density, Shape, Defects, Crystal microstructure, Chemical composition, Moisture, Marking, Grades (quality), Particle size distribution, Codes
BS EN ISO 11124-4:1997
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Low-carbon cast-steel shot
0 580 22899 1
Keywords: Steels, Surface treatment, Shot blasting, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Grit, Low-carbon steels, Cast steels, Designations, Hardness, Density, Shape, Defects, Crystal microstructure, Chemical composition, Moisture, Marking, Grades (quality), Particle size distribution, Codes
BS 7079-E4:1994
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Low-carbon cast-steel shot
0 580 22899 1
Keywords: Steels, Surface treatment, Shot blasting, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Grit, Low-carbon steels, Cast steels, Designations, Hardness, Density, Shape, Defects, Crystal microstructure, Chemical composition, Moisture, Marking, Grades (quality), Particle size distribution, Codes
BS EN ISO 11125-1:1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Sampling
0 580 23047 3
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Metals, Sampling methods, Sampling equipment, Samples, Marking, Test specimens
BS 7079-E6:1994
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Sampling
0 580 23047 3
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Metals, Sampling methods, Sampling equipment, Samples, Marking, Test specimens
BS EN ISO 11125-2:1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of particle size distribution
0 580 23048 1
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Metals, Screening (sizing), Particle size measurement, Testing conditions
BS 7079-E7:1994
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of particle size distribution
0 580 23048 1
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Metals, Screening (sizing), Particle size measurement, Testing conditions
BS EN ISO 11125-3:1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of hardness
0 580 23049 X
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Metals, Hardness measurement, Hardness testing, Specimen preparation, Testing conditions
BS 7079-E8:1994
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of hardness
0 580 23049 X
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Metals, Hardness measurement, Hardness testing, Specimen preparation, Testing conditions
BS EN ISO 11125-4:1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of apparent density
0 580 23061 9
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Metals, Density measurement, Testing conditions
BS 7079-E9:1994
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of apparent density
0 580 23061 9
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Metals, Density measurement, Testing conditions
BS EN ISO 11125-5:1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of percentage defective particles and of microstructure
0 580 23062 7
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Metals, Microscopic analysis, Testing conditions, Defects, Shape, Metallography
BS 7079-E10:1994
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of percentage defective particles and of microstructure
0 580 23062 7
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Metals, Microscopic analysis, Testing conditions, Defects, Shape, Metallography
BS EN ISO 11125-6:1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of foreign matter
0 580 23063 5
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Metals, Magnetic separation, Separation methods (chemical analysis), Testing conditions, Determination of content, Impurities
BS 7079-E11:1994
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of foreign matter
0 580 23063 5
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Metals, Magnetic separation, Separation methods (chemical analysis), Testing conditions, Determination of content, Impurities
BS EN ISO 11125-7:1997
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of moisture
0 580 23064 3
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Metals, Water content determination, Moisture measurement, Chemical analysis and testing, Testing conditions, Dry weight determination
BS 7079-E12:1994
Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of moisture
0 580 23064 3
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Metals, Water content determination, Moisture measurement, Chemical analysis and testing, Testing conditions, Dry weight determination
BS EN ISO 11126-1:1997
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. General introduction and classification
0 580 27634 1
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Painting, Coating processes, Non-metals, Classification systems, Designations, Marking, Particle size distribution
BS 7079-F1:1997
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. General introduction and classification
0 580 27634 1
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Painting, Coating processes, Non-metals, Classification systems, Designations, Marking, Particle size distribution
BS EN ISO 11126-10:2004
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Almandite garnet
0 580 36665 0
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Non-metals, Garnets, Silicate minerals, Substrates (insulating), Particle size distribution, Density, Hardness, Moisture, Determination of content, Electrical conductivity
BS 7079-F10:2004
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Almandite garnet
0 580 36665 0
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Non-metals, Garnets, Silicate minerals, Substrates (insulating), Particle size distribution, Density, Hardness, Moisture, Determination of content, Electrical conductivity
BS EN ISO 11126-10:2004
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Almandite garnet
0 580 36665 0
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Non-metals, Garnets, Silicate minerals, Substrates (insulating), Particle size distribution, Density, Hardness, Moisture, Determination of content, Electrical conductivity
BS 7079-F10:2004
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Almandite garnet
0 580 36665 0
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Non-metals, Garnets, Silicate minerals, Substrates (insulating), Particle size distribution, Density, Hardness, Moisture, Determination of content, Electrical conductivity
BS EN ISO 11126-3:1998
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Copper refinery slag
0 580 23059 7
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Non-metals, Granulated slags, Slags, Metal refining, Copper, Designations, Marking, Particle size distribution, Density, Hardness, Moisture, Impurities
BS 7079-F3:1994
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Copper refinery slag
0 580 23059 7
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Non-metals, Granulated slags, Slags, Metal refining, Copper, Designations, Marking, Particle size distribution, Density, Hardness, Moisture, Impurities
BS EN ISO 11126-4:1998
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Coal furnace slag
0 580 23060 0
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Non-metals, Granulated slags, Slags, Coal, Designations, Marking, Density, Bulk density, Hardness, Moisture, Electrical conductivity, Impurities, Particle size distribution
BS 7079-F4:1994
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Coal furnace slag
0 580 23060 0
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Non-metals, Granulated slags, Slags, Coal, Designations, Marking, Density, Bulk density, Hardness, Moisture, Electrical conductivity, Impurities, Particle size distribution
BS EN ISO 11126-5:1998
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Nickel refinery slag
0 580 23051 1
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Non-metals, Granulated slags, Slags, Metal refining, Nickel, Designations, Marking, Density, Bulk density, Hardness, Moisture, Electrical conductivity, Impurities, Particle size distribution
BS 7079-F5:1994
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Nickel refinery slag
0 580 23051 1
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Non-metals, Granulated slags, Slags, Metal refining, Nickel, Designations, Marking, Density, Bulk density, Hardness, Moisture, Electrical conductivity, Impurities, Particle size distribution
BS EN ISO 11126-6:1998
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Iron furnace slag
0 580 23052 X
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Non-metals, Granulated slags, Slags, Metal refining, Iron, Designations, Marking, Density, Bulk density, Hardness, Moisture, Electrical conductivity, Impurities, Particle size distribution
BS 7079-F6:1994
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Iron furnace slag
0 580 23052 X
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Non-metals, Granulated slags, Slags, Metal refining, Iron, Designations, Marking, Density, Bulk density, Hardness, Moisture, Electrical conductivity, Impurities, Particle size distribution
BS EN ISO 11126-7:2001
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Specification for fused aluminium oxide
0 580 25588 3
Keywords: Surface treatment, Steels, Preparation, Blast-cleaning, Abrasives, Mechanical cleaning, Aluminium oxide, Particle size distribution, Designations, Marking, Density, Hardness
BS EN ISO 11126-8:1998
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Olivine sand
0 580 23058 9
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Non-metals, Olivines, Sand, Designations, Marking, Density, Bulk density, Hardness, Moisture, Electrical conductivity, Impurities, Particle size distribution
BS 7079-F8:1994
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Olivine sand
0 580 23058 9
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Non-metals, Olivines, Sand, Designations, Marking, Density, Bulk density, Hardness, Moisture, Electrical conductivity, Impurities, Particle size distribution
BS EN ISO 11126-9:2004
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Staurolite
0 580 32928 3
Keywords: Steels, Paints, Non-metals, Blast-cleaning, Surface treatment, Abrasives, Aluminium inorganic compounds, Iron inorganic compounds, Magnesium inorganic compounds, Particle size distribution, Density, Hardness, Moisture, Chlorides, Designations, Marking
BS 7079-F9:2004
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Staurolite
0 580 32928 3
Keywords: Steels, Paints, Non-metals, Blast-cleaning, Surface treatment, Abrasives, Aluminium inorganic compounds, Iron inorganic compounds, Magnesium inorganic compounds, Particle size distribution, Density, Hardness, Moisture, Chlorides, Designations, Marking
BS EN ISO 11127-1:1998
Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Sampling
0 580 22898 3
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Non-metals, Sampling methods, Sampling equipment, Samples, Marking
BS 7079-F11:1994
Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Sampling
0 580 22898 3
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Non-metals, Sampling methods, Sampling equipment, Samples, Marking
BS EN ISO 11127-2:1998
Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of particle size distribution
0 580 23057 0
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Non-metals, Screening (sizing), Particle size distribution, Particle size measurement, Testing conditions, Size classification
BS 7079-F12:1994
Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of particle size distribution
0 580 23057 0
Keywords: Steels, Surface treatment, Blast-cleaning, Mechanical cleaning, Cleaning, Abrasives, Non-metals, Screening (sizing), Particle size distribution, Particle size measurement, Testing conditions, Size classification
BS EN ISO 11127-3:1998
Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of apparent density
0 580 22896 7